Woodland Mills — Blade Guide Bearings

By: Woodland Mills  09-12-2011
Keywords: Portable Sawmill

One set of blade guide bearings (two bearings) for the HM126 portable sawmill. Designed to fit all model years. Bearings should be replaced if they become dry internally and noisy during operation. Worn bearings will also show signs of deep grooves in the bearing casing from the bandsaw blade over time. It is recommended to replace them well before the casing splits and to check the condition of bearings before operation.



Keywords: Portable Sawmill

Other products and services from Woodland Mills

09-12-2011

Woodland Mills — HM 126 Portable Sawmill

These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentation. The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer. From the powder coated structure, to its reliable 9.5 H.P Kohler gas engine, this mill will exceed your expectations.


09-12-2011

Woodland Mills — Bandwheel Bearings

Bearings should be replaced if they become dry internally and noisy during operation or excessive play is noticed in the bandwheel. One set of bandwheel bearings for the HM126 portable sawmill. Designed to fit all model years.


09-12-2011

Woodland Mills — Track Extension

These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentations. Constructed with 1/4" thick 2.5" x 4" "L" channel which is cross supported with heavy duty 3" x 6" rectangle channels. The HM126 sawmill is capable of milling 16 ft length logs with the addition of one extra track extension.