Peerless-Winsmith: Motion Control

By: Winsmith  09-12-2011
Keywords: Motion Control

 Motion Control Products

WINSMITH has put together a family of precision motion control products designed to meet the needs of motion control applications. The products in this family have been individually designed to provide various levels of backlash to accommodate the required level of precision. Also included is a whole new family of input motor adapters to better match the many square and round motor interfaces in today's servo motors.

S-ELIMINATOR

Patented adjustable backlash 


120-64,000 in. lbs.
4:1 to 60:1

  • near zero backlash

  • field adjustable to 1-2 arc minutes of movement

  • built around the D-90 TYPE SE product line

  • interfaces with most servo motor flanges

C-ELIMINATOR

Precision adjustable backlash


150-64,000 in. lbs.
4:1 to 3600:1

  • field adjustable backlash

  • maximum backlash of 6 arc minutes

  • built around the C-Line product

  • rugged design

S-MINIMIZER

Precision fixed backlash 


270-10,500 in. lbs.
4:1 to 10,000:1

  • very low fixed backlash

  • maximum backlash of 11 arc minutes

  • built around the D-90 TYPE SE product line

C-MINIMIZER

Precision fixed backlash


150-64,000 in. lbs.
5:1 to 3,600:1

  • very low fixed backlash

  • maximum backlash of 11 arc minutes

  • built around the C-Line product

Product Selection Assistance Chart

PRPDUCT Maximum
Backlash
Product Size Range Ratio Range Field Adjustable
S-ELIMINATOR 1-2 arc min. 1.33-3.5"CD
913-935
4:1 to 60:1 Yes
C-ELIMINATOR 6 arc min. 1.33-9.0"CD
1C-15C
4:1 to 3600:1 Yes
S-MINIMIZER 11 arc min. 1.75-4.25"CD
917-943
4:1 to 10,000:1 No
C-MINIMIZER 11 arc min. 1.33-9.0"CD
1C-15C
5:1 to 3,600:1 No

© 2003 PEERLESS-WINSMITH INC.

Keywords: Motion Control

Contact Winsmith

Email - none provided

Print this page

Other products and services from Winsmith

09-12-2011

Peerless-Winsmith: Maximizer Series

The BASIC ENVIRONMENTAL PROTECTION reducer is designed to provide an increased level of protection over standard products at a minimal cost. The product includes features such as epoxy paint, synthetic lubrication, plunger pressure vent and flingers on the output shafts.