Single-Panel Hydraulic Doors by Wilson

By: Wilson Doors  09-12-2011
Keywords: Steel, Door, Aluminum

Wilson's Clear-Tec™ is the industry's ONLY single-panel hydraulic door manufactured of lightweight 6061-T6 aircraft aluminum. Wilson combines aluminum door manufacturing prowess with simple, easy-to-use hydraulic technology. The result is a single-panel door that weighs 40% less than comparable steel single-panel doors - allowing for building savings and the use of low-pressure hydraulics. This greatly reduces the wear and tear on components and the system and ensures years of trouble-free operation.

Simple and secure

No cables, drive shafts, limit switches or gearboxes - the door is easily raised and lowered via two hydraulic cylinders. The cylinders also pull the door tight and lock it in place. A remotely located motor, pump, and reservoir system ensures even lift and efficient operation.

Saves valuable building space

The door only requires six inches of headroom, swinging efficiently and effectively out to provide unparalleled head clearance.

Great looks and low maintenance

The raw mill finish of the door's 6061-T6 aluminum tubing also affords a clean, crisp look and higher aesthetic value than steel product - and no rusting or chipping paint.

Economical modular construction

Clear-Tec™ features modular, bolt-together construction - so no field welding is required which equates to quick and very easy installation. The supporting steel frame is supplied with the door system.

Features & Benefits

Aluminum Construction

Single-Panel crafted of 6061-T6 aircraft-grade aluminum, the Clear-Tec™ door is 40% lighter, yet stronger than comparable steel doors. Raw mill aluminum finish provides high aesthetic value and won't rust or chip paint.

Simple Hydraulic Operation

Efficient low-pressure hydraulic system - no cables, driveshaft, gearboxes or limit switches. Door is raised and lowered with two low maintenance hydraulic cylinders.

Minimal Headroom Requirements

Requires only six inches of headroom- saving valuable building space.

Modular Installation

Modular bolt-together construction requires no field welding - installation is quick and easy.

Door Controller

Push-button controls all for simple and convenient door operation.

Energy Saving Weather Seal

Standard top, bottom and side weather-stripping provide effective seal against the elements.

Integral Steel Frame and Supports

Steel support frame provided - jamb and header frame included with door.

Secure Closure

Once door is closed, cylinders pull door tight and lock it in place.

Motor/Pump Location

A remotely located motor, pump, and reservoir system ensures even lift and efficient operation.

Keywords: Aesthetic Value, Aluminum, Aluminum Construction, Building Space, Door, door controller, Energy Saving, field welding, Hydraulic Door, Hydraulic System, Limit Switches, Mill Finish, Modular Construction, Steel, steel frame, Steel Support Frame, Support Frame, Weather Seal,

Other products and services from Wilson Doors

09-12-2011

electric door

It includes integral limit switches to stop the door when it reaches the full open or closed position, as well as a clutch to disengage the operator in the event of a power failure. This 220 VAC single phase operator delivers the power necessary to open and close bottom rolling doors, even in ice and snow situations.


09-12-2011

Wilson Doors - Products

Unparalleled quality and workmanship - the Cadillac of the industry. Lightweight 6061-T6 aircraft-grade aluminum -40% lighter than steel.


09-12-2011

Roll-Tec™ Bottom Rolling Steel Aircraft Hangar Door

This oversight ensures from start to finish, your Roll-Tec™ Bottom Rolling Steel Aircraft Hangar Door is designed, produced and shipped on time and to exacting specifications. A simple three-button control box with Wilson's Posi-Lock™ door control allows for easy door operation and the ability to stop the door anywhere in its travel.


09-12-2011

Single-Panel Hydraulic Door, Aircraft Hangar Doors by Wilson

Because there are no cables, drive shafts, limit switches or gearboxes, the door is easily raised and lowered via two hydraulic cylinders. It features all the same benefits of our famous Clear-Tec™ door but it is constructed of economical steel. A remotely located motor, pump, and reservoir system ensures even lift and efficient operation. Clear-Max features modular, bolt-together construction so that no field welding is required.


09-12-2011

Premier Hangar Door by Wilson: Aluminum bi-fold doors

Unlike other manufacturers, every Wilson door is custom-built to your specifications, eliminating the need for costly building modifications or product "adaptations" in the field. They are custom built to match your exact specifications, are easy to install, and have one of the lowest life cycle costs in the industry. Regardless of the environment, the raw mill finish provides a clean, crisp look and higher aesthetic value than steel products.


09-12-2011

Valu-Tec Bi-fold Door by Wilson: Steel Aircraft Hangar Doors

While similarly priced doors typically require you to push and hold their control buttons, ours feature momentary activation: With a single touch of a button, the door opens or closes automatically. Pushbutton operation, auto-locks and a host of solid, Wilson-designed-and-built features make for trouble-free operation and the kind of durability and quality you only get with Wilson Doors.