Do It Yourself Kits

By: Weedsbgone  09-12-2011
Keywords: Weeds

Instructions

1.Fill sand tubes with all purpose sand

2.seal open end with zip ties provided

3.Slide sand tube into pocket and put zip tied end in first

4.Fill all pockets and fasten end with tacks provided

5.Roll screen up into a roll and prepare to roll the screen into water

6.Get friend to hold the roll in the water as you walk back wards into the water

7.continue to roll screen out until roll if fully extended

and let the mat sink to the bottom.

8.Repeate same steps as first section and be sure to overlap

by one foot to keep the weeds from coming between the mats

Keywords: Weeds

Other products and services from Weedsbgone

09-12-2011

Products

Screen comes with pockets sewn in every 4 ft Thermally sealed poly tubes for each pocket just add sand (sand not included a total of approx 3 bags all purpose sand required to do complete kit approx. Brush Cutter for heavier brush underwater and land use Grass Trimmer & Extended Pruner Chain Saw. Sponge Damping or Rubber Damping.


09-12-2011

Retailers

1699 Chemong Road Peterborough, Ontario 705-748-9111. Causeway Plaza in Bridgenorth, Ontario 705-292-7667. Chemong Home Hardware Building Centre.