Portables | Veronics Instruments Inc

By: Veronics  09-12-2011
Keywords: data logging, Moisture Probe, Capacitive Sensor,

PM880 portable hygrometer

The PM880 portable hygrometer is a complete, intrinsically safe, portable system for portable measuring the moisture content of industrial gases or liquids. The PM880 system consists of the battery-powered moisture analyzer, moisture probes, battery charger, cables and accessories, and is packaged in a durable soft carrying case with a handle and shoulder strap. The PM880 comes with full data logging capabilities and a built-in infrared port to send and data to a PC for detailed analysis and reporting.

PM880AC Portable Hygrometer

The PM880AC Portable Hygrometer. This is an AC only version of the powerful PM880 Hygrometer.

Dewpro MMY245

The Dewpro MMY245 Speeds Response Time. Convenient and portable, this moisture analyzer can quickly spot check the performance of gas dryers for compressed air, breathing air, and pure gas supplies. The planar capacitive sensor combines accurate dew point measurement with fast response time. The sensor is stored in a very dry environment within the analyzer between measurements, which speeds response time. Also, the instrument can be configured according to the desired moisture unit of measure, temperature unit of measure, or other operating parameters.

Moisture Monitor Series 35 IS (MMS 35 IS)

The Moisture Monitor Series 35 IS (MMS 35 IS) portable hygrometer is certified intrinsically safe, is battery powered, and is housed in a damage-resistant case. When purchased with the internal sample system option, a built-in moisture probe and sampling system with process connections are included, making it a completely self-contained hygrometer system. If purchased without the internal sample system package, the MMS 35 IS requires an external moisture probe connected to the hygrometer by a cable.

MIS Series Smart Moisture Probe

The MIS Series Smart Moisture Probe with 16 bit resoution dewpoint measuremsnt and optional temperature and pressure measurement for use with the PM880 Portable Moisture Analyser.

TF Series Moisture probe

The TF Series Moisture probe with dewpoint measurements and optional temperature and pressure measurement for use with the PM880 Portable Moisture Analyser.

M Series Moisture probe

The M Series Moisture probe with dewpoint and optional temperature measurement for use with the PM880 and MMS35IS Portable Mositure Analyzers.

Keywords: Capacitive Sensor, data logging, Moisture Probe,

Contact Veronics

Email - none provided

Print this page

Other products and services from Veronics


Transmitters | Veronics Instruments Inc

The Veridri Moisture Transmitter provides Dryer Manufacturers and other OEM’s with the means to make simple accurate and reliable moisture measurements with a wide variety of Dewpoint ranges. The MMY30 is specifically designed to measure dew point or ppm at line pressure or atmospheric pressure for control of desiccant air dryers. The MMY31 mounts directly in-line for applications such as glove boxes, where a bypass is not appropriate.


Handhelds | Veronics Instruments Inc

The Protimeter MMS (Moisture Measurement System) combines moisture meter and hygrometer functionality in one instrument to give full moisture measurement and dampness diagnostic capability. The Grainmaster i and the Grainmaster 900e meters enable the user to measure moisture and temperature levels in ground samples of a wide range of crops.


Calibration | Veronics Instruments Inc - calibration

We produce our own very dry reference gas and use a primary standard, the Optica Chilled Mirror hygrometer, as our reference, the MG101 as a calibrated Moisture Generator and the Legacy Brand of Panametrics Microprocessor based hygrometers as a secondary reference and for recording of data. Accurate field calibration/verification of moisture sensors. Repeatable levels of water vapour in a carrier gas.


Chilled Mirror | Veronics Instruments Inc

The Optica measures dew point temperature by regulating the temperature of a polished metal mirror by the use of optical feedback such that a constant mass of dew or frost is maintained. The temperature of the mirror is measured with a precise PRTD and is by definition equal to the dew or frost point. This Primary Standard has the following Features and Benefits.


Analyzers | Veronics Instruments Inc

The system response is dependent on the length of sample tubing, sample system components, flow rate and pressure, as well as the change in moisture concentration. This multifunction analyzer uses charts, graphs and windows to display any of six parameters for as many as six channels simultaneously on a large, backlit LCD.


Services | Veronics Instruments Inc

On-Site Liquid Flow Studies – Veronics factory trained technicians can provide you with flow measurements using our Portable Non Intrusive PT878 Transit Time Clamp-On flowmeter for pipe sizes 1/2. Steam Trap Surveys – With the help of the U.E. Systems Ultrasonic Inspection System Veronics can perform Steam Trap Surveys at your location and take the guess work out of Steam Trap Maintenance.