Calibration | Veronics Instruments Inc - calibration

By: Veronics  09-12-2011
Keywords: Gas, calibration, Traceable Calibration

Veronics Instruments Inc. has a “State of the Art” N.I.S.T. traceable calibration system on-site. We produce our own very dry reference gas and use a primary standard, the Optica Chilled Mirror hygrometer, as our reference, the MG101 as a calibrated Moisture Generator and the Legacy Brand of Panametrics Microprocessor based hygrometers as a secondary reference and for recording of data. Our data is computer generated and tested for both accuracy and repeatability with each moisture probe we receive.

  • Generates precise, repeatable levels of water vapour in a carrier gas
  • Generation range is -75° to 10°C frost/dew point (at typical ambient temperatures)
  • Accurate field calibration/verification of moisture sensors
  • No power required to operate
  • Inherently explosion-proof
  • Requires dry inert nitrogen gas as the source gas

Keywords: calibration, Gas, Moisture Probe, Traceable Calibration,

Contact Veronics

Email - none provided

Print this page

Other products and services from Veronics

09-12-2011

Transmitters | Veronics Instruments Inc

The Veridri Moisture Transmitter provides Dryer Manufacturers and other OEM’s with the means to make simple accurate and reliable moisture measurements with a wide variety of Dewpoint ranges. The MMY30 is specifically designed to measure dew point or ppm at line pressure or atmospheric pressure for control of desiccant air dryers. The MMY31 mounts directly in-line for applications such as glove boxes, where a bypass is not appropriate.


09-12-2011

Portables | Veronics Instruments Inc

The PM880 system consists of the battery-powered moisture analyzer, moisture probes, battery charger, cables and accessories, and is packaged in a durable soft carrying case with a handle and shoulder strap. When purchased with the internal sample system option, a built-in moisture probe and sampling system with process connections are included, making it a completely self-contained hygrometer system.


09-12-2011

Handhelds | Veronics Instruments Inc

The Protimeter MMS (Moisture Measurement System) combines moisture meter and hygrometer functionality in one instrument to give full moisture measurement and dampness diagnostic capability. The Grainmaster i and the Grainmaster 900e meters enable the user to measure moisture and temperature levels in ground samples of a wide range of crops.


09-12-2011

Chilled Mirror | Veronics Instruments Inc

The Optica measures dew point temperature by regulating the temperature of a polished metal mirror by the use of optical feedback such that a constant mass of dew or frost is maintained. The temperature of the mirror is measured with a precise PRTD and is by definition equal to the dew or frost point. This Primary Standard has the following Features and Benefits.


09-12-2011

Analyzers | Veronics Instruments Inc

The system response is dependent on the length of sample tubing, sample system components, flow rate and pressure, as well as the change in moisture concentration. This multifunction analyzer uses charts, graphs and windows to display any of six parameters for as many as six channels simultaneously on a large, backlit LCD.


09-12-2011

Services | Veronics Instruments Inc

On-Site Liquid Flow Studies – Veronics factory trained technicians can provide you with flow measurements using our Portable Non Intrusive PT878 Transit Time Clamp-On flowmeter for pipe sizes 1/2. Steam Trap Surveys – With the help of the U.E. Systems Ultrasonic Inspection System Veronics can perform Steam Trap Surveys at your location and take the guess work out of Steam Trap Maintenance.