Mi0 Self-powered two-way loudspeaker : Turbosound

By: Turbosound Usa  09-12-2011
Keywords: Frequency Response, Pole Mount

  • Applicable for:
  • PortableSound

Self-powered two-way loudspeaker

The Milan Mi0 is a compact trapezoidal self-powered two-way loudspeaker enclosure consisting of a 10" reflex-loaded neodymium low frequency driver and a 1" high frequency compression driver on a 90°H x 60°V dispersion HF horn in an optimally tuned injection-moulded enclosure, together with an integrated two-channel amplifier module.

The integrated amplifier is a two channel unit - the Class D low frequency section delivering 180 watts while the Class AB high frequency section delivers 50 watts - which provides a balanced XLR microphone input and balanced line input on a jack/XLR connector with individual level controls, as well as overall bass and treble tone controls.

A balanced male XLR output provides a line level mix-out signal to additional powered MILAN enclosures. Mains power is supplied via an IEC main connector with integrated fuseholder. The trapezoidal cabinet is constructed from gas-injected polypropylene, self-coloured in blue/black, with a powder-coated perforated galvanised steel mesh grille, and the symmetrical 43° angled sides enable use as a wedge monitor. A dual-angle pole mount socket is fitted, and a recessed flush handle is provided on the top. Rigging points are provided on the top and bottom to enable vertical or horizontal suspension in permanent installations using M10 eyebolts.

Net Weight 11.89kg (26.2lbs)
Dimensions 521.5mm x 329.5mm x 293mm (20.5" x 13" x 11.6")
Components 1 x 10" (254mm) LF driver, 1 x 1" (25mm) HF compression driver
Frequency Response 55Hz - 22kHz ±3dB
Dispersion
Maximum SPL 119dB continuous, 125dB peak
Construction Injection-moulded polypropylene enclosure. Self-coloured in black-blue. Recessed carrying handle. Integral dual angle pole mount socket
Grille Powder coated perforated galvanised steel mesh
Connectors Mic input: XLR female, wired pin 2 hot; Line input: Jack/XLR, wired pin 2 hot; Mix out: XLR male, wired pin 2 hot; IEC mains connector with integrated fuseholder
Flying Hardware (6) M10 internal threaded rigging points
Spares & Accessories LS-1029 10" (254mm) LF loudspeaker
RC-1029 Recone kit
CD-122 1" (25mm) HF compression driver
RD-122 Replacement HF diaphragm
MG-M10 Metal grille
PA-90 Speaker pole 90cm
PB-55 Wall bracket, pole mount fixing
EB-10 M10 shoulder eyebolt

Keywords: Frequency Response, Pole Mount

Contact Turbosound Usa

Email - none provided

Print this page

Other products and services from Turbosound Usa

09-12-2011

M18 Self-powered subwoofer : Turbosound

The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier. The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers.


09-12-2011

M15 Self-powered two-way loudspeaker : Turbosound

Cutting edge digital electronics provides higher efficiency than conventional amplifiers so there's no need for bulky heatsinks and noisy fans - Milan is a great sounding, portable, durable and stylishly attractive go-anywhere powered loudspeaker that will raise your sound to a new level.