M18 Self-powered subwoofer : Turbosound

By: Turbosound Usa  09-12-2011
Keywords: Frequency Response, Pole Mount, Socket Connectors

  • Applicable for:
  • PortableSound

Self-powered subwoofer

The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.

The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.

The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.

Net Weight 45kg (99lbs)
Dimensions 500mm x 700mm x 600mm (19.7" x 27.6" x 23.6")
Components 1 x 18" (457mm) LF driver
Frequency Response 36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL 125dB continuous, 131dB peak
Construction 18mm (3/4") plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware M10 rigging points on top and bottom
Spares & Accessories LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module

Keywords: Frequency Response, Pole Mount, Socket Connectors

Contact Turbosound Usa

Email - none provided

Print this page

Other products and services from Turbosound Usa


M15 Self-powered two-way loudspeaker : Turbosound

Cutting edge digital electronics provides higher efficiency than conventional amplifiers so there's no need for bulky heatsinks and noisy fans - Milan is a great sounding, portable, durable and stylishly attractive go-anywhere powered loudspeaker that will raise your sound to a new level.


Mi0 Self-powered two-way loudspeaker : Turbosound

The integrated amplifier is a two channel unit - the Class D low frequency section delivering 180 watts while the Class AB high frequency section delivers 50 watts - which provides a balanced XLR microphone input and balanced line input on a jack/XLR connector with individual level controls, as well as overall bass and treble tone controls.