M15 Self-powered two-way loudspeaker : Turbosound

By: Turbosound Usa  09-12-2011
Keywords: Frequency Response, Pole Mount, Socket Connectors

  • Applicable for:
  • PortableSound

Self-powered two-way loudspeaker

Milan delivers a whopping 450 watts of super-clean power and the most output from a lightweight package. Cutting edge digital electronics provides higher efficiency than conventional amplifiers so there's no need for bulky heatsinks and noisy fans - Milan is a great sounding, portable, durable and stylishly attractive go-anywhere powered loudspeaker that will raise your sound to a new level.

The integrated two-channel mixer with mic and line inputs easily balances all your audio sources for the perfect mix every time. Milan's lockable jack/XLR inputs will accept instruments, microphones and mp3 players so you won’t even need a separate mixer for most gigs. The internal DSP with frequency-dependent limiting delivers maximum audio quality and protects the drive units from accidental damage. Sophisticated limiters act quickly and transparently to make sure that Milan operates well within its safe limits and allows precise shaping of the loudspeaker's frequency response depending on how loud it is, thereby optimising the sound quality at all levels.

The Mix Out function allows daisy-chaining of Milan loudspeakers and provides the versatility to easily expand your system. Simply connect from the mix-out to one of the inputs on the next Milan loudspeaker and you have an extra mic or line input to add to the mix Milan provides the versatility to easily expand your system.

The Converging Elliptical Waveguide helps to distribute your sound more evenly over a wider listening area so you need fewer loudspeakers to cover your audience effectively. Its shallow profile allows both the drive units to be aligned so that the highs and lows are perfectly in sync with each other. The result is better sound to a wider audience.

Net Weight 22kg (48.4lbs)
Dimensions 731mm x 471mm x 410mm (28.8" x 18.5" x 16.1")
Components 1 x 15" (381mm) LF driver, 1 x 1" (25mm) HF compression driver
Frequency Response 36Hz - 17kHz ±3dB, 23Hz - 22kHz ±10dB
Maximum SPL 125dB continuous, 131dB peak
Construction Injection-moulded polypropylene enclosure. Self-coloured in black/blue. Three recessed carrying handles. Integral dual angle pole mount socket
Connectors Input: (2) Jack/XLR female, wired pin 2 hot; Mix out: (1) XLR male, wired pin 2 hot; IEC mains connector with integrated fuseholder
Flying Hardware M10 rigging points on top and bottom
Spares & Accessories LS-1530 15" (381mm) LF loudspeaker
CD-118 1" (25mm) HF compression driver
RD-116/118 Replacement HF diaphragm
MG-MI5 Metal grille
PB-55 Wall bracket, pole mount fixing
EB-10 M10 shoulder eyebolt

Keywords: Frequency Response, Pole Mount, Socket Connectors

Contact Turbosound Usa

Email - none provided

Print this page

Other products and services from Turbosound Usa


M18 Self-powered subwoofer : Turbosound

The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier. The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers.


Mi0 Self-powered two-way loudspeaker : Turbosound

The integrated amplifier is a two channel unit - the Class D low frequency section delivering 180 watts while the Class AB high frequency section delivers 50 watts - which provides a balanced XLR microphone input and balanced line input on a jack/XLR connector with individual level controls, as well as overall bass and treble tone controls.