Trampoline World - Red Deer, Alberta, Canada - bigwave setup

By: Trampoline World  09-12-2011
Keywords: Springs

Parts List

• 2 Long Bars • 96 Green Straps (plus 2 extra)
• 2 Short Bars • 1 Set of Safety Pads
• 4 Leg/Corner Sections • 1 Safety Plaque
• 1 10'x10' Square Trampoline Mat • 2 Smaller Plastic Ties
• 112 Springs (plus 2 extra) • 1 Instruction Manual
• 8 Black Straps (1" shorter than green straps)

Setup Instructions - Please read carefully before starting setup!

Please Note: Should you need to disassemble your trampoline, simply repeat these set-up instructions in reverse.

Keywords: Springs

Contact Trampoline World

Email - none provided

Print this page

Other products and services from Trampoline World

09-12-2011

Trampoline World - Red Deer, Alberta, Canada - bigair setup

You may need to twist the spring slightly while pulling to ensure the hook faces down when attaching to the frame. Should you need to disassemble your trampoline, simply repeat these setup instructions in reverse. Lay the 4 frame bars in a circle with the drilled holes facing up. Counting every 10th triangle, and every 10th hole, repeat Step 6. Attach the safety plaque with the plastic ties included.


09-12-2011

Trampoline World - Red Deer, Alberta, Canada - megabounce setup

Should you need to disassemble your trampoline, simply repeat these setup instructions in reverse.