SPECIALS - thejigstore.com - Woodworking Jigs & Router Accessories

By: The Jig Store  09-12-2011

Our Price 6.88

We have a few AKEDA oversize .319" straight bits with 1/4" shanks on clearance. Here is how you can save money:

Use this oversize straight bit with your oversize guide bushing! You will get exactly the same results as using a standard size straight bit with a standard size guide bushing, because one cancels out the other!

Contact The Jig Store

Email - none provided

Print this page

Other products and services from The Jig Store


Other Products - thejigstore.com - Woodworking Jigs & Router Accessories

We?ve included a centering cone with our router sub base that allows you to accurately center the sub base (and therefore your guide bushing) when you install the sub base. This notch fits a pin on our sub base to prevent the guide bushing from rotating when you tighten it. We strongly recommend using a router sub base with any dovetail jig. It includes all the necessary mounting hardware.


AKEDA Products - thejigstore.com - Woodworking Jigs & Router Accessories

For your BC24 we recommend AKEDAs comprehensive C-Kit which contains most of the available accessories including the full set of optional angle through dovetail pin guides. We also recommend the clear acrylic router sub base (P/N 3700) and the accessory storage case. The AKEDA is the only jig that allows you to vary the angle of your through dovetail pins. It has all the same proven features and shares all the same kits and accessories.


New Products - thejigstore.com - Woodworking Jigs & Router Accessories

It can be used as a temporary storage bin for the guide fingers that you are using to make your joint, or it can be turned upside down and stored underneath the open case. This exclusive offering from the Jig Store has corner dovetails that highlight the use of two contrasting select hardwoods, with a hand-rubbed beeswax/citrus oil finish.