Reed Relays - Reed Switch Relays

By: Standex Electronics  09-12-2011
Keywords: Catalog Download

Unmatched in quality and reliability for nearly half a century, Standex Electronics reed switch based relays are used in many applications - from low to high volume. Designs capable of switching 1 amp and signal loads. Many designs are FCC Section 68 compatible and UL recognized. Available in general purpose - low cost designs and dust-covered self-leaded construction. Models may be specified with magnetic shielding, electrostatic shielding or internal suppression diodes. Available for 5, 6, 12 and 24 volt coils.

Reed Relay Catalog

Download Standex Electronics entire catalog of Reed Relays (16 MB download)

JX Series

  • 1A/1B and 2A/2B Contacts
  • Capable of switching 1 amp as well as signal loads
  • Dust Covered Self-leaded construction
  • RTC,DTC,TTL and HTL compatible
  • Currently only available in larger volume

JL Series

  • Capable of switching 1 amp as well as signal loads
  • Dust Covered Self-leaded construction
  • RTC,DTC,TTL and HTL compatible
  • Pulse Operated to save power
  • Contact Memory
  • Dual or Single coil operated
  • Currently only available in larger volume

JG Series

  • Capable of switching .25 amp as well as signal loads
  • Dust Covered Self-leaded construction
  • RTC,DTC,TTL and HTL compatible
  • Currently only available in larger volume

JC Series

  • Capable of switching 1 amp as well as signal loads
  • RTC, DTC,TTL & HTL Compatible
  • 5,6,12 and 24 volt coils
  • Magnetic shielding, electrostatic shielding, or internal suppression diode available
  • UL recognized

JB Series

  • Capable of switching 1 amp as well as signal loads
  • Available ,1" or .15" pin spacing
  • 5,6,12 and 24 volt coils
  • Magnetic shielding, electrostatic shielding, or internal suppression diode available

EG Series

  • Capable of switching 1 amp as well as signal loads
  • RTC, DTC,TTL & HTL Compatible
  • 5,6,12 and 24 volt coils
  • Designed to meet CSA and FCC requirements
  • Optional magnetic shield
  • Fully sealed construction
  • UL recognized

EB Series

  • Capable of switching 1 amp as well as signal loads
  • RTC, DTC,TTL & HTL Compatible
  • Designed to meet UL, CSA, FCC requirements
  • Optional magnetic shield
  • Fully sealed construction
  • UL recognized

Keywords: Catalog Download

Other products and services from Standex Electronics

09-12-2011

High Frequency Transformers - High Frequency Inductors - High Frequency Chokes - military aerospace magnetics

Standex is experienced in providing "flight" assemblies that are manufactured to the most stringent quality standards then proven in an industry leading environmental and electronic test lab. We have experience manufacturing to stringent quality standards - like Mil-Std 202, Mil-Std 981, Mil-PRF 27, NASA standard NHB 8739.3, AS9100, and ITAR.


09-12-2011

Fluid Level Sensors - Reed Switch Fluid Level Sensors - Conductivity Based Fluid Level Sensors

Standex manufactures fluid level sensors using magnetic and conductive sensing technology to best suit customer requirements. Download the entire Standex Electronics catalog of fluid level and proximity sensors. Suitable for most conductive fluids with minimal particulate matter. Bottom mount design uses separate seal grommet. Side mount design uses separate seal grommet. Mates with Toyota connector P/N 90980-11068.


09-12-2011

Low Frequency Transformers - Low Frequency Inductors - Low Frequency Chokes

Our unsurpassed in-house capabilities mean we can tailor a standard product or start from scratch with a new design. Standex offers a full line of low frequency transformers, inductors and chokes in standard and custom designs. ATC-Frost UL / CSA family recognition assures fast, trouble free approval of your equipment. Custom sizes, ratings and terminations may be engineered for your specific application.


09-12-2011

High Frequency Transformers - High Frequency Inductors - High Frequency Chokes - high frequency magnetics

Toroidal common mode chokes can be specified with exact value required from an economical family of standard products - they can be configured for vertical or horizontal mounting. Standex offers a variety of high frequency custom and standard transformers, inductors and chokes in the in the 20 KHz to RF range. Standard or custom designs can be proven in industry-leading environmental and electrical test lab.