High Frequency Transformers - High Frequency Inductors - High Frequency Chokes - high frequency magnetics

By: Standex Electronics  09-12-2011
Keywords: Transformers, Inductors, Catalog Download

Standex offers a variety of high frequency custom and standard transformers, inductors and chokes in the in the 20 KHz to RF range. Smallest surface mount toroidal power "chip" inductors in the industry. Toroidal common mode chokes can be specified with exact value required from an economical family of standard products - they can be configured for vertical or horizontal mounting, with or without base. Standard or custom designs can be proven in industry-leading environmental and electrical test lab.

Catalog

Download all of the high-freqency magnetic component data sheets below (14MB dowload)

ST series

Surface Mount toroidal power 'chip' inductor

  • Use for discontinuous mode converters up to 1.5MHz
  • Operating temperature up to 85°C
  • The smallest surface mount toroidal inductor in industry
  • Ideal for for storage inductor, high efficiency battery operated regulator, and DC-DC power converters in portable electronics
  • Patented insert molded packaging is smaller in O.D. and height than other components with similar electrical characteristics
  • Toroidal core - lowest stray field for close component placement
  • Very low DC resistance for very high circuit efficiency
  • Saturation current is as much as 50% higher than similar components
  • Custom sizes and values may be engineered for your specific application

SP series

Surface Mount toroidal power 'chip' inductor

  • Use in continuous mode converters up to 500 KHz
  • Operating temperature up to 155°C
  • The smallest surface mount toroidal inductor in industry
  • Ideal for input filters and DC-DC power converters in portable electronics
  • Patented insert molded packaging is smaller in O.D. and height than other components with similar electrical characteristics
  • Toroidal core - lowest stray field for close component placement
  • Very low DC resistance for very high circuit efficiency
  • Saturation current is as much as 50% higher than similar components
  • Custom sizes and values may be engineered for your specific application

CI CJ Series

Toroidal Differential mode inductor

  • For switching power supply, EMI filter and other applications
  • Build your own standard part number to give exactly the value you require, within an economical family of standard core sizes
  • Avilable configured horizontally or vertically, with or without a base
  • Inductances available to 5mH current carrying capability available to 5 amps
  • Custom Sizes and values may be engineered for your specific application

CM Series

Toroidal Common Mode Choke

  • CM series common mode chokes are designed for common mode noise up to 30 MHz on A.C. and D.C lines
  • Build your own standard part number to give exactly the value you require, within an economical family of standard core sizes
  • Available configured vertically or horizontally, with or without a base
  • Inductances available to 15 milli Henries
  • Current carrying capability available to 40 Amps
  • Custom Sizes and values may be engineered for your specific application

CSB series

Current Transformer - PC mount

  • Primary and Secondary windings are PC integrated - no need for the customer to install the primary winding separately as is usually required in toroidal designs
  • Low cost compact package design
  • Varnish impregnated to reduce audible noise
  • Plastic bobbin meets the UL 94 flamability requirement
  • Custom Sizes and values may be engineered for your specific application

SJ / SU Series

Surface Mount toroidal inductor

  • Ideal where space and weight are critical, and surface mount is required
  • When used as inductors, they may be connected for higher current lower inductance or lower current higher inductance
  • When used as 1:1 transformers (coupled inductors) they provide electrical isolation
  • May be manufactured with economical powdered iron cores or higher performance low loss cores
  • Other core materials available for a variety of applications
  • Custom Sizes and values may be engineered for your specific application

Switching Regulator Inductors

Encapsulated Switching Regulator Inductors

  • Desitned to meet the requirements of Mil-PRF 287, 288 and 289
  • Inductances to 10 mH
  • Current carrying capability to 15 A
  • Double Winding Styles Available for More Current Capacity
  • Completely Encapsulated Construction
  • Center Hole for Mounting
  • Custom Sizes and values may be engineered for your specific application

Switching Inductors

Encapsulated Switching Regulator Inductors

  • Inductances to 2 mH
  • Current carrying capability to 30 A
  • Completely Encapsulated Construction
  • Threaded mounting Insert for Additional Mounting Strength
  • Custom Sizes and values may be engineered for your specific application

Scott T Transformers

Input Scott T Synchro to Resolver Converter Transformers

  • Standex Electronic Scott T transformers are precision manufactured primarlily for military and aerospace applications
  • Three-wire Syncro Angle Data form the input to a Scott T transformer which isolates them from converter ground and translates them into two signals - the amplitudes being portionate to the sine and cos
  • Contact Standex for your custom variation, engineered for your specific application

400 Hz Power Xfmrs. 1.5 VA to 9 VA

400 Hz Power Transformers, 1.5 VA to 9 VA

  • Miniature Encapsulated Toroidal 400 Hz Power Transformers
  • Designed to meet the requirements of Pil-PRF-27/37 through /47
  • 308 standard designs from 1.5VA through 25 VA
  • A wide variety of output voltages offer maximum diesign flexibility
  • Contact Standex for your custom variation, engineered for your specific application

400 Hz Power Xfmrs, 16 - 25 VA

400 Hz Power Transformers, 16 - 25 VA

  • Miniature Encapsulated Toroidal 400 Hz Power Transformers
  • Designed to meet the requirements of Pil-PRF-27/37 through /47
  • 308 standard designs from 1.5VA through 25 VA
  • A wide variety of output voltages offer maximum diesign flexibility
  • Contact Standex for your custom variation, engineered for your specific application

Keywords: Catalog Download, Inductors, Transformers

Other products and services from Standex Electronics

09-12-2011

High Frequency Transformers - High Frequency Inductors - High Frequency Chokes - military aerospace magnetics

Standex is experienced in providing "flight" assemblies that are manufactured to the most stringent quality standards then proven in an industry leading environmental and electronic test lab. We have experience manufacturing to stringent quality standards - like Mil-Std 202, Mil-Std 981, Mil-PRF 27, NASA standard NHB 8739.3, AS9100, and ITAR.


09-12-2011

Fluid Level Sensors - Reed Switch Fluid Level Sensors - Conductivity Based Fluid Level Sensors

Standex manufactures fluid level sensors using magnetic and conductive sensing technology to best suit customer requirements. Download the entire Standex Electronics catalog of fluid level and proximity sensors. Suitable for most conductive fluids with minimal particulate matter. Bottom mount design uses separate seal grommet. Side mount design uses separate seal grommet. Mates with Toyota connector P/N 90980-11068.


09-12-2011

Reed Relays - Reed Switch Relays

Models may be specified with magnetic shielding, electrostatic shielding or internal suppression diodes. Available in general purpose - low cost designs and dust-covered self-leaded construction. Many designs are FCC Section 68 compatible and UL recognized. Designs capable of switching 1 amp and signal loads. Designed to meet UL, CSA, FCC requirements. Available for 5, 6, 12 and 24 volt coils.


09-12-2011

Low Frequency Transformers - Low Frequency Inductors - Low Frequency Chokes

Our unsurpassed in-house capabilities mean we can tailor a standard product or start from scratch with a new design. Standex offers a full line of low frequency transformers, inductors and chokes in standard and custom designs. ATC-Frost UL / CSA family recognition assures fast, trouble free approval of your equipment. Custom sizes, ratings and terminations may be engineered for your specific application.