Fluid Level Sensors - Reed Switch Fluid Level Sensors - Conductivity Based Fluid Level Sensors

By: Standex Electronics  09-12-2011
Keywords: Sensors, Catalog Download

Standex manufactures fluid level sensors using magnetic and conductive sensing technology to best suit customer requirements. Our unique designs are helping companies to gain competitive market advantages. Our conductive fluid level sensors have false full protection and current level shift to indicate fluid level. Custom molding capabilities allow us to design and build float and sensors to suit any fluid level sensing application. That's one reason why we're the partner of choice for automotive fluid sensing projects.

Standex Fluid Level, Proximity, Motion and Current Sensors Catalog

Download the entire Standex Electronics catalog of fluid level and proximity sensors.

R12431 Series

  • For blow or injection molded bottles
  • Side mount design uses separate seal grommet
  • Form A (normally open) and Form B (normally closed) operation
  • Switch rated 0.5A/100V/10VA max
  • Internal snubber resistor
  • Connector meets requirements of Packard part number12162289
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12449 Series

  • For blow or injection molded bottles
  • Side mount design uses separate seal grommet
  • Form A (normally open) and Form B (normally closed) operation
  • Switch rated 0.5A/100V/10VA max
  • Internal snubber resistor
  • Mates with Toyota connector P/N 90980-11068
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12456 Series

  • For blow or injection molded bottles
  • Side mount design uses separate seal grommet
  • Form A (normally open) and Form B (normally closed) operation
  • Switch rated 0.5A/100V/10VA max
  • Internal snubber resistor
  • Mates with Yazaki 7283-6434-40
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12347 Series

  • For blow or injection molded bottles
  • Bottom mount design
  • Form A (normally open) and Form B (normally closed) operation
  • Switch rated 0.5A/100V/10VA max
  • Internal snubber resistor
  • Mates with Ford E57B14A464AA
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12349 Series

  • For blow or injection molded bottles
  • Side mount design
  • Form A (normally open) and Form B (normally closed) operation
  • Switch rated 0.5A/100V/10VA max
  • Internal snubber resistor
  • Mates with Ford E57B14A464AA
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12072 Series

  • For blow or injection molded bottles
  • Top mount/ snap in design
  • Form A (normally open) operation
  • Switch rated 1.5A/200V/50VA max
  • Adjustable sensing point up to 18 inches from top of bottle
  • Standard termination-0.25 inch open spade
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12372 Series

  • For blow or injection molded bottles
  • Indication delay feature
  • Bottom mount design uses separate seal grommet
  • Form A (normally open) and Form B (normally closed) operation
  • Switch rated 1.5A/200V/50VA max
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12421 Series

  • For blow or injection molded bottles
  • Indication delay feature
  • Bottom mount design uses separate seal grommet
  • Form A (normally open) and Form B (normally closed) operation
  • Switch rated 1.5A/200V/50VA max
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12406 Series

  • For blow or injection molded bottles
  • Indication delay feature
  • Bottom mount design with power harness
  • Form A (normally open) and Form B (normally
  • closed) operation
  • Switch rated 1.5A/200V/50VA max
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

LS100 Series

  • Passive device with no internal electronics
  • Driven from external electronics
  • Suitable for most conductive fluids with minimal particulate matter
  • May be operated from user's electronics in a "pulsing" mode to reduce electrolysis
  • May be operated with a bipolar pulsing current from user electronics, eliminating electrolysis
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

LS200 Series

  • False Full Protection and current level shift to indicate fluid level
  • Available as a two-wire device
  • Capable of substantial miniaturization
  • Equipped with Standex patented "bias ring" concept
  • Suitable for most conductive fluids
  • Suitable in fluids with substantial particulate matter
  • Operated by a DC current pulse supplied from user's electronics; current draw indicates fluid level
  • Optional LED available for local fluid level indication
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

LS300 Series

  • Sensitivity Shift / False Full Protection
  • Full electronics and substantial probe miniaturization
  • Equipped with Standex patented "bias ring" concept
  • Available as a three-wire device
  • Suitable for most conductive fluids
  • Suitable in fluids with substantial particulate matter
  • Internal electronics used to eliminate electrolysis
  • Input is 9V to 30 V DC
  • Provided with a switched output; 30 volt open collector sync, TTL or CMOS
  • Optional LED available for local fluid level indication
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12468 Series

  • External sensor for injection molded bottles
  • Form A or Form B operation with separate float
  • Bottom mount with o-ring seal
  • Switch rated 1.5A /200V/50VA max
  • Mates with Packard P/N 12052641
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

R12481 Series

  • External sensor for injection molded bottles
  • Form A or Form B operation with separate float
  • Bottom mount with o-ring seal
  • Switch rated 0.5A/100V/10VA max
  • Mates with Packard P/N 12052641
  • Contact Standex Electronics for more information on this or to discuss your specific requirement

Keywords: Catalog Download, Sensors

Other products and services from Standex Electronics

09-12-2011

High Frequency Transformers - High Frequency Inductors - High Frequency Chokes - military aerospace magnetics

Standex is experienced in providing "flight" assemblies that are manufactured to the most stringent quality standards then proven in an industry leading environmental and electronic test lab. We have experience manufacturing to stringent quality standards - like Mil-Std 202, Mil-Std 981, Mil-PRF 27, NASA standard NHB 8739.3, AS9100, and ITAR.


09-12-2011

Reed Relays - Reed Switch Relays

Models may be specified with magnetic shielding, electrostatic shielding or internal suppression diodes. Available in general purpose - low cost designs and dust-covered self-leaded construction. Many designs are FCC Section 68 compatible and UL recognized. Designs capable of switching 1 amp and signal loads. Designed to meet UL, CSA, FCC requirements. Available for 5, 6, 12 and 24 volt coils.


09-12-2011

Low Frequency Transformers - Low Frequency Inductors - Low Frequency Chokes

Our unsurpassed in-house capabilities mean we can tailor a standard product or start from scratch with a new design. Standex offers a full line of low frequency transformers, inductors and chokes in standard and custom designs. ATC-Frost UL / CSA family recognition assures fast, trouble free approval of your equipment. Custom sizes, ratings and terminations may be engineered for your specific application.


09-12-2011

High Frequency Transformers - High Frequency Inductors - High Frequency Chokes - high frequency magnetics

Toroidal common mode chokes can be specified with exact value required from an economical family of standard products - they can be configured for vertical or horizontal mounting. Standex offers a variety of high frequency custom and standard transformers, inductors and chokes in the in the 20 KHz to RF range. Standard or custom designs can be proven in industry-leading environmental and electrical test lab.