SS Rig and Equipment Ltd. Products

By: Ss Rig And Equipment  09-12-2011
Keywords: pump, Rig And Equipment

SS Rig and Equipment Ltd.



Our basic Flushby unit has a 54' / 16.4m nominal height mast, that is available in both conventional / slant or conventional configurations.  A rod board may be added to allow for the hanging of single rods.  These masts are Engineer certifiedfor 50,000lbs / 22,300 daN, in both slant and vertical modes.

We also now offer Flushbys in 63' and Telescoping 72' configurations, for both single and double rods.

These Flushby units typically have a Gardner Denver TEE-F Triplex pump complete with a 3" gear type feeder pump.  As a Transport Canada Registered Portable Tank Facility , we mount a TC406 Flushby product tank on the unit.  The configuration of the tank is a typical Flushby tank.

The Flushbys main winch is a Pullmaster HL-25, with an extra capacity 3/4" grooved drum.  The auxiliary winch is a Pullmaster PL-5.

The Flushby may be equipped with a picker at the rear bumper, (Maxi-lift, Fassi, Hiab).

These Flushby units are free standing and use hydraulic levelling jacks.

We have also been authorized by Transport Canada to affix the National Safety Mark to our Flushbys as a final stage manufacturer.

Our major Flushby components are designed to fit most standard truck chassis, so choice of the chassis make is only limited to some minor considerations.

These Flushby units may also be fitted with some custom equipment as requested by the customer.

Pressure Trucks

Our Standard Pressure Truck is equipped with a Namco 450hp split box coupled to a Gardner Denver Triplex pump. 

However our Pressure Trucks are custom built for our customers specfific needs so pump, split box, tank makes and sizes can be changed at any time. 

Pump Trucks

As with our standard Pressure Trucks, our standard Pump Truck is equipped with a Namco split box and a Gardner Denver triplex pump.  The Pump Truck though is also a highly customized unit, so decking, winches, tool boxes, etc. will be different with each unit.

Custom Fabrication

We will build what you require.  Bring us your welding projects from big to small, our staff is very experencied in fitting and welding of all types.  Stick, Mig, "B" pressure, we can do them all.

Give us a call: 780.979.9987

Authorized by Transport Canada to affix the National Safety Mark, and registered as a Portable Tank Facility.

Keywords: pump, Rig And Equipment