Redundancy switching System Upconverter Redundant switching System Downconverter L-Band, C-Band, Ku-Band

By: Sotca  09-12-2011
Keywords: Converters, Frequency Converters

STC 83204SW redundancy 1:N switch is a robust, user friendly and economical solution for critical applications, where minimum downtime is required. It is designed to be used as a part of Sotca's frequency converters redundant system and it is fully compatible with all STC 83xxxx converters models. When operated in "Auto" mode, the unit monitors alarm signals of an on-line converters. If fault is detected, the switch will automatically fall over to the hot stand-by unit. Using manual mode, any unit can be maintained, troubleshooted and replaced on the fly, without affecting the link. STC 83201SW's high isolation level, low return loss assure high performance of the system and ultra low level of cross-interference. Unit comes in a standard 1U(1.75") 19" Rack-mounted enclosure. The model STC 83204SW pictured above features a 4:1 configuration, but it could be supplied in any configuration, up to 8:1.

Keywords: Converters, Frequency Converters

Contact Sotca

Email - none provided

Print this page

Other products and services from Sotca

09-12-2011

Block Converters

Each unit may be configured to include one or two different or identical converter's modules.High stability internal reference oscillator and high quality low noise power supply are standard features for these converters. Frequency Block Converters, C- or Ku-Band Block Up converters, C- or Ku-Band Block Down Converters, Variable Gain C- or Ku-Band block converters, Fixed Gain C- or KU-Band Block Converters, Outdoor, Rack Mounted.


09-12-2011

products

Satellite L- C- KU-Band Synthesized abd block converters Up/Down Converters Upconverters Downconverters, C-Band Radar elimination filters, C-band Interference filters, Redundancy switchess. The modular design allows to configure them as single separate upconverters or downconverters, or as a combination up/downconverter, packed into 1.75" Rack. All designs are based on the best available HEMT.


09-12-2011

L-band Up/Down Converters, IF to L-Band Upconverter, L-Band to IF Downconverter, Frequency synthesizers

Impressive amplitude linearity, ultra low phase noise, far exciding IESS 308 / IESS 309 requirements, low spurious, high dynamic range make the converter ideally suitable for SCPC, MCPC, DAMA with high data rates transmission and advanced digital modulation. The STC 83601U is a high-performance, low-cost synthesized dual conversion Upconverter, providing solution for satellite systems requiring frequency conversion up from IF to L-Band.


09-12-2011

Ku-Band to IF Downconverter, IF to KU-Band Upconverter, KU-Band Synthesized Frequency Converters

Economically priced high performance line of IF to Ku-Band Fully Synthesized Upconverters and Ku-Band to IF downconverters features 125 kHz frequency resolution, low phase noise, low spuriousis and high dynamic range. Download STC 83701D Ku-Band to IF Downconverter Datasheet for detailed information. Download STC 83701U IF to Ku-Band Upconverter Datasheet for detailed information.


09-12-2011

Synthesized Converters L-band Up/Down Converters, L-Band Upconverter,C- Ku-Band Upconverter, C- Ku- Downconverter

Our company had spent a long time in R&D to come up with the modern design of our high-performance frequency converters, aimed at achieving high-performance, top reliability, and low cost by using innovative sophisticated design, high-quality components and many years of our experience in the field of RF&Microwave.


09-12-2011

C-Band to IF Downconverter, IF to C-Band Upconverter, C-Band Synthesized Frequency Converters

Economically priced high performance line of IF to C-Band Fully Synthesized Upconverters and C-Band to IF downconverters features 125 kHz frequency resolution, low phase noise, low spuriousis and high dynamic range. Download STC 83801D C-Band to IF Downconverter Datasheet for detailed information. Download STC 83801U IF to C-Band Upconverter Datasheet for detailed information.


09-12-2011

Satcom Filters C-Band Transit-Reject Filter C-Band Altimeter C-Band IF to L-band Frequency Converter

These low-loss, low power, miniature evanescent-mode band-pass or harmonic filters could be used in applications where filter size and weight are critical, primarily for Ku-Band frequencies and bellow. These heavy-duty, Ultra High Power, low insertion loss, sharp roll-off filters with compact size and llightweight could be an ideal solution in many applications.