FingerTech Robotics - Pulleys & Belts

By: Fingertech Robotics  09-12-2011

Our specialty Timing Pulleys and Belts are the perfect solution for transmitting power from motors to wheels or shafts.

While O-Rings and round belts will slip under tension, timing belts have teeth that ensure a positive lock to the pulleys.

Nine pulley sizes means there are 45 different ratio combinations to choose from!

Use with

, or any other 3mm pitch belt.

•S3M pitch (3mm high-torque)

•Belt Width (maximum): 4mm

•Sizes: 15 Teeth - 42 Teeth

•Bore: 3mm (15T and 16T bores can be drilled up to 5/32", larger pulleys can be drilled up to 1/4")


Other products and services from Fingertech Robotics

09-12-2011

FingerTech Robotics - Wheels & Hubs

Precision engineered delrin hubs and rubber rollers attach to a customizable mount for any motor shaft size between 3mm and 1/4". Adding some Loctite to the screws will reassure you that an improperly glued roller will not fall off during a competition. Competition Grade set includes upgraded aluminum mounts and threaded pins with screws to hold the rollers on.


09-12-2011

FingerTech Robotics - Radio Equipment

The DX5e brings together the unbeatable control of genuine DSM2 technology with the simplest, easiest-to-use design available, letting anyone, from parkfliers to students to instructors and more, take advantage of Spektrum technology for less. Delta wing mixing, HI/LO rates, Servo mixing. Basic 5-channel 2.4GHz DSM2 radio.


09-12-2011

FingerTech Robotics - Motors & Servos

Especially suited to both Gold and Silver Spark motors, they will also hold all "Mini Metal Gearmotors", small Copal motors, Maxon motors, etc. These anodized aluminum motor mounts will fit just about any small motor with mounting hole distances from 10mm - 12.5mm. A motor with 11mm hole spacing will raise the motor shaft up to 11.7mm.


09-12-2011

FingerTech Robotics - Motor Controllers

These speed controllers are perfectly matched to our own line of Spark motors, Maxon 13mm-size gearmotors, any Banebots 16mm-size gearmotor, small Copals, and small Sanyos. New features:• Internal BEC (battery eliminator circuit) provides 5V to receiver - no extra receiver battery required. These tinyESCs replace both versions of the old style controller.


09-12-2011

FingerTech Robotics - Robot Kits

You will not find a cheaper robot kit with this functionality and expandability anywhere else. Chassis, motors, wheels, speed controllers, radio receiver, and a 6-channel transmitter. The Viper kit comes with everything you need to get started in competitive robotics.