cbp

By: Hydratec Hydraulics  09-12-2011
Keywords: Pumps, tractor

CBP

Bi-Directional Hydro-Static Pumps

One of the most revolutionary concepts in tractor power came about when the hydrostatic hydraulic transmission powered the Versatile Bi-directional tractor. The tool carrier concept was born. No longer did a Saskatchewan farmer need to rotate his head 140 degrees to see what his rear mounted snow blower/implement was doing. Oilfield operators in Saskatchewan, Alberta and BC benefit equally.

Tools from front-end loaders to swather's to grapples could be mounted on this radical new tractor concept.

Hydratec has supported the revolution. Every bi-directional from the 150 to the TV140 is supported by our extensive reman inventory of tested hydro stats. Our reman program has been so successful that we created a “dog sled” shipping concept to make shipping the new units to customers extremely easy. Returning your hydro cores to our rebuild center just blocks north of the Case / New Holland parts depot is as easy as tightening four bolts.

Technical support is a strong feature of our program. We welcome customers with hydrostatic problems to do minor troubleshooting under the guidance of a trained and experienced hydraulic technician. Testing kits can be rented from Hydratec for a minimal daily fee and are ready to be shipped out across Western Canada and the States.

Hydratec has developed many system saving service tips; from winter operating instructions to the finest extreme pressure spiral hose assembly program. When you have worn or poorly rebuilt systems even inferior hose programs will usually work. Hydratec rebuilt pumps, motors and hoses meet the 6000 psi challenge and we will put our guarantee on it. Any spiral hose assembly we manufacture has a written three-year guarantee.


Our flat lapping of the pump / motor rotating groups means minimal high-pressure leakage; performance is the word.

Call us at Hydratec - we have every Versatile / New Holland hydrostatic drive ready to go. Give us a call about

our hydrostatic exchange program – we’d be glad to hear from you.

Keywords: Pumps, tractor

Contact Hydratec Hydraulics

Email - none provided

Print this page

Other products and services from Hydratec Hydraulics

09-12-2011

Cold_Pour - cold pour

Cold Pour® is a fluid additive which has an extremely low pour point, which when added to existing hydraulic or other petroleum based fluids, makes these fluids capable of cold weather operation.


09-12-2011

Cold_Pour - remanpumps

Plates, cylinder blocks, pistons, mechanical shaft seals, slippers and end caps are lapped to remove all wear marks and ensure perfect flatness of surface. Swash plates are assembled and running neutral is dialed in to ensure complete control of the pump when installed back on the machine. This test includes checking that the pump returns to running neutral and the relief valves are set to the factory specs.