Cap2v8® for Centrifuge Tubes

By: Sanisure  09-12-2011
Keywords: Cap Design, Cleaning Validation, Custom Tubing,

The SaniSure® Cap2v8® one-piece molded tube and cap system provides for aseptic transfer, storage, and sampling within 50 mL, 500 mL, and 15 mL centrifuge tubes.


One piece Molded Cap Design
  • Reduces contamination & product loss associated w/ barbed fittings
  • Closed System protects product integrity
  • Provides aseptic seal for high purity biologicals
Custom Design Capabilities With Standard Product Deliveries
  • Fast turnaround on small lots and custom configurations
  • Closure System can be used with various plastic tubes
  • Custom tubing sizes, lengths, and accessories available
  • Available individually packaged or as a component in an assembly
Material Variation Compatibility On Tubing and Caps
  • PVC tubing (RF weldable/sealable) – Hytrel Cap
  • C-Flex tubing (Heat weldable/sealable) – Polypropylene Cap
  • PharMed tubing (Heat weldable/sealable) – Polypropylene Cap
Single Use
  • Cost Effective
  • Reduced assembly & installation time
  • Eliminate cleaning validation

Keywords: Aseptic Seal, barbed fittings, Cap Design, Cleaning Validation, Custom Tubing, Product Loss,

Contact Sanisure

Email - none provided

Print this page

Other products and services from Sanisure

09-12-2011

Single Use Cap2v8® Assemblies

Whether your application demands a secure system for transferring in and out of sterile media bottles, GL45 media bottles, or centrifuge tubes, SaniSure® has a solution.. SaniSure can provide these single-use Cap2v8® assemblies integrated from various tubing, connectors, clamps, filters, and other components. SaniSure single-use Cap2v8® one piece molded cap & tube assemblies can be provided specific to your requirements.


09-12-2011

SaniSure® CLAMP

The SaniSure® CLAMP is the very first sanitary clamp design to offer a fast, safe, and secure way to connect plastic to plastic, plastic to BPE stainless steel, and BPE stainless steel to BPE stainless steel sanitary fittings. With the unique feature of a cable tie secured by a cable tie installation tool, the connection is NON-OPERATOR DEPENDENT and provides a VALIDATABLE TORQUE controlled compression each and every time.


09-12-2011

Cap2v8® Sterile Media Bottles

SaniSure® Cap2v8® Sterile Media Bottle Assemblies provide for a means of transfer, storage, and sampling in media bottle sizes 60 mL, 125 mL, 250 mL, 500 mL, 1L and 2L, thru a one-piece molded tube and cap system. SaniSure offers a full array of custom options including tubing, fittings/end connections, sterile connectors and bottle variations.


09-12-2011

Single Use Bottle Assemblies

Whether your application has a need for a closed system with containers such as Erlenmeyer/Spinner/Shaker Flasks, Carboys, Roller Bottles, Custom GL45 Bottles, or Custom Media Bottles, etc., SaniSure® has a solution.. Closures for these bottle assemblies produced in various technologies: Molded Silicone, Molded TPE, machined or welded inserts made of PVDF and PP..


09-12-2011

Single Use Tubing Assemblies

Reducing internal safety concerns, improving internal inventory management, reducing internal labor and assembly costs, and improving overall operational efficiency by reducing downtime and utilizing scientists/operators for hired responsibilities.