Samba Preclin 420/360 transducer

By: Samba Sensors  09-12-2011
Keywords: Transducers, Pressure Measurements

The Samba Preclin pressure catheters are ultra-fast, high-precision transducers with excellent dynamic response for monitoring basically any type of physiological pressures - both in fluids and in gas.

Each transducer is calibrated at the factory and does not require any on-site calibration by the user - it's simply to Plug'n'Play!

The Samba Preclin transducer is available in four different pressure measurements ranges; one low pressure and three high pressure versions (see below). The Samba Preclin transducers are not approved for human use.   

Keywords: Pressure Measurements, Transducers

Other products and services from Samba Sensors

09-12-2011

Samba 202 Control Unit

Samba’s unique pre-calibration concept has been improved even further by storing the transducer’s calibration information directly on its optical connector. Intelligent electronics in conjunction with fiber optics produce accurate data at high speed, making instantaneous pressure change analysis possible. Two fiber-optic transducers can be connected simultaneously for relative pressure studies.


09-12-2011

Samba 200 Software Package

SAMBA 200 PROFILE SETTINGThe Profile Setting module permits the user to store predefined settings in the Samba 200 unit, including measurement frequency, pressure unit and absolute or relative measuring mode. The module imports data from the file stored in the internal memory of the Samba 200 unit, or can retrieve data files created by the Samba Data Collection Module.


09-12-2011

Samba 201 Control Unit

Intelligent electronics in conjunction with fiber optics produce accurate data at high speed, making instantaneous pressure change analysis possible. The Samba 201 is a high-precision pressure monitoring instrument for stand-alone use. It is primarily designed to be used in life science research. The Samba 201 Control Unit is not yet approved for human use.


09-12-2011

Why Samba Sensors

That is factory calibrated and doesn’t need any further calibration.The only thing required is an automatic “zero baseline” set against the ambient air pressure before you start measuring. No specific preparation, like pre-soaking of the transducer, is needed.