By: Deniscimaf  09-12-2011
Keywords: engine

The EWF-170 is the last generation of hydraulic power unit on the market. This unit is specially designed to feed a hydraulic option of your choice on any type of equipment. Its compact design allows the unit to be used in different types of mobile equipments. This sizing allows for direct installation on your machine to keep his versatility.

Managed by DENIS CIMAF Power Management System, this unit controles the head flow, engine and hydraulic needs. The Cummins “ECM” controller communicates with the DENIS CIMAF microcontroller by direct “Canbus” to ensure the operator gets the maximum Horse Power at all time without scarifying reliability.

All of the EWF-170 control are monitored through a simple display from the operator’s cab, without requiring ignition key. The display shows all the operator needs, such as: working pressure, engine load, fuel gage, hydraulic level, hydraulic and engine temperature, trip hour meter, trip head meter, reversing fan and more.

The EWF-170 protects the hydraulic system and diesel engine with its “PLUS ONE” micro controller. In the case of the oil pressure drop, low coolant or low hydraulic charge pressure, the computer will shut the engine and provide diagnostic on the display.

Keywords: engine

Other products and services from Deniscimaf



DTN brushcutter-mowers for graders were previously marketed under the names BM Super Cut, BM Super Cut II and Gridz by the original manufacturer located in Castlegard, BC, Canada. These industrial hydraulic attachments are a vertical-shaft brushcutting head that is mounted on an articulating arm attached to the front of a grader.


DAH brushcutter-mulchers | Land clearing equipment | Contact +1 877 279-230

There are two types of DAH brushcutters: the standard version designed for intensive use, and the heavy industrial version intended for the most difficult and demanding jobs. DAH models offer variable displacement, axial-piston motors that minimize overheating problems and improve re-acceleration, and timing-belt drive to eliminate slippage. Both versions offer narrow and wide cutting widths, providing solutions for 7- to 30-ton excavators.


DAF brushcutter-mulchers | Land clearing equipment | Contact +1 877 279-230

DAF models also have one or two variable displacement axial-piston motors (to minimize overheating problems and improve re-acceleration) and a timing-belt drive system to eliminate slippage. The DAF product line is not available for sale within North America.