DTN | DENIS CIMAF Inc

By: Deniscimaf  09-12-2011
Keywords: Roadside Maintenance

These industrial hydraulic attachments are a vertical-shaft brushcutting head that is mounted on an articulating arm attached to the front of a grader. Since graders are often under-utilized, the DTN brushcutter-mower can be put to work on any available grader. And the faster traveling speeds of graders means that roadside maintenance work can be done up to four times faster than with a mower mounted on a conventional tractor.

DTN mowers use vertical-shaft brushcutting disc technology with two freely rotating knives and a head mounted at the end of an articulating arm, a design that offers considerable advantages.

DTN models also include one or two axial-piston motors, a cooling circuit, and an electric-hydraulic control panel in the operator’s cab.

DTN brushcutter-mowers for graders were previously marketed under the names BM Super Cut, BM Super Cut II and Gridz by the original manufacturer located in Castlegard, BC, Canada.

There are three (3) models of the DTN brushcutter-mowers: one with a 1,2 m (4-ft) brushcutting head, another with a 1,5 m (5-ft) head, and a third with a patented double head providing a total cutting width of 2,4 m (8-ft).

Keywords: Roadside Maintenance

Other products and services from Deniscimaf

09-12-2011

EWF | DENIS CIMAF Inc

The display shows all the operator needs, such as: working pressure, engine load, fuel gage, hydraulic level, hydraulic and engine temperature, trip hour meter, trip head meter, reversing fan and more. The Cummins “ECM” controller communicates with the DENIS CIMAF microcontroller by direct “Canbus” to ensure the operator gets the maximum Horse Power at all time without scarifying reliability.


09-12-2011

DAH brushcutter-mulchers | Land clearing equipment | Contact +1 877 279-230

There are two types of DAH brushcutters: the standard version designed for intensive use, and the heavy industrial version intended for the most difficult and demanding jobs. DAH models offer variable displacement, axial-piston motors that minimize overheating problems and improve re-acceleration, and timing-belt drive to eliminate slippage. Both versions offer narrow and wide cutting widths, providing solutions for 7- to 30-ton excavators.


09-12-2011

DAF brushcutter-mulchers | Land clearing equipment | Contact +1 877 279-230

DAF models also have one or two variable displacement axial-piston motors (to minimize overheating problems and improve re-acceleration) and a timing-belt drive system to eliminate slippage. The DAF product line is not available for sale within North America.