DAF brushcutter-mulchers | Land clearing equipment | Contact +1 877 279-230

By: Deniscimaf  09-12-2011
Keywords: land clearing, Land Clearing Equipment, Variable Displacement

DAF brushcutter-mulchers | Land clearing equipment | Contact +1 877 279-230

DAF models also have one or two variable displacement axial-piston motors (to minimize overheating problems and improve re-acceleration) and a timing-belt drive system to eliminate slippage.

There are two (2) versions of the DAF model: the double-drive industrial version and the single-drive unit.

*The DAF product line is not available for sale within North America.


 

Keywords: land clearing, Land Clearing Equipment, Variable Displacement

Other products and services from Deniscimaf

09-12-2011

EWF | DENIS CIMAF Inc

The display shows all the operator needs, such as: working pressure, engine load, fuel gage, hydraulic level, hydraulic and engine temperature, trip hour meter, trip head meter, reversing fan and more. The Cummins “ECM” controller communicates with the DENIS CIMAF microcontroller by direct “Canbus” to ensure the operator gets the maximum Horse Power at all time without scarifying reliability.


09-12-2011

DTN | DENIS CIMAF Inc

DTN brushcutter-mowers for graders were previously marketed under the names BM Super Cut, BM Super Cut II and Gridz by the original manufacturer located in Castlegard, BC, Canada. These industrial hydraulic attachments are a vertical-shaft brushcutting head that is mounted on an articulating arm attached to the front of a grader.


09-12-2011

DAH brushcutter-mulchers | Land clearing equipment | Contact +1 877 279-230

There are two types of DAH brushcutters: the standard version designed for intensive use, and the heavy industrial version intended for the most difficult and demanding jobs. DAH models offer variable displacement, axial-piston motors that minimize overheating problems and improve re-acceleration, and timing-belt drive to eliminate slippage. Both versions offer narrow and wide cutting widths, providing solutions for 7- to 30-ton excavators.