Fluid Bed Annealing Furnace

Fluid Bed Annealing Furnace from ICE Wire Line Equipment Inc.

By: ICE Wire Line Equipment Inc.  27-03-2011
Keywords: Production Equipment, Wire Industry, Annealing Furnace

As the world's largest producer of fluidized bed furnaces for the continuous production of ferrous wire, I.C.E. offers years of successful experience. The fluid bed offers an environmentally preferred method of heat treating the wire and eliminates potential health concerns for production personnel.

As the fluidized sand medium does not "wet" the wire, post treatment hazardous effluent removal is reduced.

I.C.E. has supplied fluidized bed furnaces for fine to large gauge wire operating at medium and high production speed throughout the world. Each unit supplied has been designed for the specific customer requirements and production rates.

Keywords: Annealing Furnace, continuous in-line furnace, Fluid Bed Furnace, fluidized bed furnace, Heat Treatment Furnace, Production Equipment, Wire Industry, Wire Line Equipment, Wire processing equipment design and engineering, Wire processing equpment, parts and services, Wire Production,

Contact ICE Wire Line Equipment Inc.

Email

Print this page

Other products and services from ICE Wire Line Equipment Inc.

Ceramic Wire Sinker from ICE Wire Line Equipment Inc. thumbnail
19-05-2015

Ceramic Wire Sinker

The I.C.E. Ceramic Wire Sinker is used as a guide for wires while they are submerged under molten zinc.


Galvanizing Lines from ICE Wire Line Equipment Inc. thumbnail
03-07-2011

Galvanizing Lines

I.C.E supplied individual capital equipment and turnkey production lines to the Wire Industry.


Insulating Collar Part No.: 1044 from ICE Wire Line Equipment Inc. thumbnail
03-07-2011

Insulating Collar Part No.: 1044

Insulating Collar Part No.: 1044


Immersion Burner Recirculating Inner Tube Part No.: 1043-1 from ICE Wire Line Equipment Inc. thumbnail
17-04-2011

Immersion Burner Recirculating Inner Tube Part No.: 1043-1

Alumina Flame Splitter (Inner Tube) Part No.: 1043-1.


Silicon Carbide Immersion Burner Outer Tube Part No.: 1045-1 from ICE Wire Line Equipment Inc. thumbnail
17-04-2011

Silicon Carbide Immersion Burner Outer Tube Part No.: 1045-1

Silicon Carbide Immersion Burner Outer Tube Part No.: 1045-1


Wax Tank from ICE Wire Line Equipment Inc. thumbnail
10-04-2011

Wax Tank

The Wire Waxing System is designed to provide a lubricating and protective wax-soluble coating to galvanized steel wire.


Quench Tank from ICE Wire Line Equipment Inc. thumbnail
10-04-2011

Quench Tank

The Quench Tank is of the "Flood Weir" type to ensure the wire maintains a straight line (no dipper roll).


Design, engineering, manufacture, comsulting and supply of wire producing equipment from ICE Wire Line Equipment Inc. thumbnail
10-04-2011

Design, engineering, manufacture, comsulting and supply of wire producing equipment

 Austenitizing Furnaces, Fluid Bed Annealing Furnace , Fluid Bed Quenching Furnace, Fumeless Acid Wave Pickling, Gas Fired Drying Oven, Turbo Dryer, Phosphate & Borax Coating, Immersion Burner Galvanizing Furnace, Top Fired Galvanizing Furnace, Ceramic Sinker Mechanism, CommercialCoat-Pad Wiping, Charcoal Wiping System, Gas Gravel Wiping System, Nitrogen Wiping System, Quench Tank, Wax Tank, Spare Parts and others.


Burner Assembly Part No.: 1036 from ICE Wire Line Equipment Inc. thumbnail
27-03-2011

Burner Assembly Part No.: 1036

Burner Assembly Part No.: 1036


Air Tube Part No.: 1038 from ICE Wire Line Equipment Inc. thumbnail
27-03-2011

Air Tube Part No.: 1038

Air Tube Part No.: 1038


Burner Body Part No.: 1039-4 from ICE Wire Line Equipment Inc. thumbnail
27-03-2011

Burner Body Part No.: 1039-4

Burner Body Part No.: 1039-4


Complete Immersion Burner Part No.: 1033 from ICE Wire Line Equipment Inc. thumbnail
27-03-2011

Complete Immersion Burner Part No.: 1033

Complete Immersion Burner Part No.: 1033


Commercial Coat-Pad Wiping from ICE Wire Line Equipment Inc. thumbnail
27-03-2011

Commercial Coat-Pad Wiping

The I.C.E. Pad Wiping System has been designed to provide an excellent method of zinc wiping to various wire sizes.


Turbo Flux Dryer from ICE Wire Line Equipment Inc. thumbnail
27-03-2011

Turbo Flux Dryer

The I.C.E Turbo Flux Dryer is the most effective and efficient method of drying wires prior to their immersion in a Galvanizing Furnace.


Top Fired Galvanizing Furnace from ICE Wire Line Equipment Inc. thumbnail
27-03-2011

Top Fired Galvanizing Furnace

The I.C.E Top Fired Galvanizing Furnace relies upon heat transfer to the molten metal either through the surface or the side walls of the Galvanizing Furnace.