HD-501 Electro-Hydraulic Training System

By: Mechatechs  09-12-2011
Keywords: flow control, Hydraulic Hose, Control Valve

HD-501 is a modular system designed for the development of professional skills related to electro-hydraulics. Skills such as:

· Identification and use of electro-hydraulics components

· Function of the electro-hydraulics elements

· Analysis and Design of simple hydraulics circuits

· Analysis and design of sequential circuits based on relays

· Analysis and design of circuits using proximity sensors

All the components used in design of this training system are industrial and manufactured by Duplomatic Corporation. The components are mounted on specific base plates in order to mounting safe and secure on anodized aluminum working panel.

The most important components:

1xHydraulic Power pack

1xShut-off valve

2xPressure gauge

1xTransparent Oil Storage in return line

1xDistribution block with Pressure gauge

1xSignal input unit

1xSignal indicator unit

1xTimer and Counter unit

1xRelay unit

1x24V power supply unit

1xSiemens Logo! PLC

1x 4/2- way NC solenoid valve

1x4/3- way single solenoid valve

1xRelief valve

2xDouble acting cylinder

2xFlow control valve

2xOne- way flow control valve

1xPhotoelectric sensor

1xInductive proximity sensor

1xCapacitive proximity sensor

2xLeft actuated Electrical Limited switch

2xRight actuated Electrical Limited switch

3xBranch Tee

2xNone return valve

4x0.5m Flexible hydraulic hose with quick release coupling

4x0.8m Flexible hydraulic hose with quick release coupling

4x1.0m Flexible hydraulic hose with quick release coupling

2x1.5mFlexible hydraulic hose with quick release coupling

1xconnection cables set

1xMagneticHydraulic Symbols Set

Keywords: Anodized Aluminum, Control Valve, flow control, Flow Control Valve, Hydraulic Hose, Oil Storage, power pack, Pressure Gauge, Proximity Sensor, Return Valve,

Contact Mechatechs

Email - none provided

Print this page

Other products and services from Mechatechs

09-12-2011

AT-205 Industrial Automation Training System

The "filling station 1" simulates such scenario with a storage tank filled with PCV granules and equipped with special funnel that open and close by a pneumatic linear actuator. Its skillfulness and attractive design allows the simulation of the operation of a real factory, thus allowing the study of different scenarios.


09-12-2011

HD-101 Hydraulics Training System

All the components used in design of this training system are industrial and manufactured by SMC Corporation. HD-101 is a modular system designed for the development of professional skills related to Hydraulics. 4x0.5m Flexible hydraulic hose with quick release coupling. 1xDistribution block with Pressure gauge. 1xOne- way flow control valve.