HD-101 Hydraulics Training System

By: Mechatechs  09-12-2011
Keywords: flow control, Hydraulic Hose, Control Valve

HD-101 is a modular system designed for the development of professional skills related to Hydraulics. Skills such as:

Identification and use of Hydraulic components

Function of the Hydraulic elements

Analysis and design of simple Hydraulic circuits

All the components used in design of this training system are industrial and manufactured by SMC Corporation. The components are mounted on specific base plates in order to mounting safe and secure on anodized aluminum working panel.

The most important components:

1xHydraulic Power pack

1xShut-off valve

2xPressure gauge

1xTransparent Oil Storage in return line

1xDistribution block with Pressure gauge

1x4/2-way hand lever valve

1x4/3-way hand lever valve

1xHydraulic motor

1xSingle acting cylinder

1xDouble acting cylinder

1xAccumulator

1xPressure relief valve

1xFlow control valve

1xOne- way flow control valve

3xBranch Tee

2xNone return valve

4x0.5m Flexible hydraulic hose with quick release coupling

4x0.8m Flexible hydraulic hose with quick release coupling

4x1.0m Flexible hydraulic hose with quick release coupling

2x1.5m Flexible hydraulic hose with quick release coupling

1xWeight

1xMagnetic Hydraulic Symbols Set

Keywords: Anodized Aluminum, Control Valve, flow control, Flow Control Valve, Hydraulic Hose, Oil Storage, power pack, Pressure Gauge, Return Valve

Contact Mechatechs

Email - none provided

Print this page

Other products and services from Mechatechs

09-12-2011

HD-501 Electro-Hydraulic Training System

HD-501 is a modular system designed for the development of professional skills related to electro-hydraulics. Analysis and design of sequential circuits based on relays. 4x0.5m Flexible hydraulic hose with quick release coupling. 2xRight actuated Electrical Limited switch. 1x 4/2- way NC solenoid valve.


09-12-2011

AT-205 Industrial Automation Training System

The "filling station 1" simulates such scenario with a storage tank filled with PCV granules and equipped with special funnel that open and close by a pneumatic linear actuator. Its skillfulness and attractive design allows the simulation of the operation of a real factory, thus allowing the study of different scenarios.