Fugesco Inc. - Mechanical Seals - controlpanel

By: Fugesco  09-12-2011
Keywords: Stainless Steel, control panel, Water Supply

Control Panel

The seal water control panel is designed to regulate the flow and pressure of water supply to the seal.

Water is injected into the seal at a higher pressure than the turbine pressure. A pressure differential must be kept at all times.

This system includes the following:

A High Signal Magnetic Flow meter System designed to handle difficult high-noise application while maintaining the benefits of dc technology. It provides remote-mounting capabilities for installation where it is impractical for integrally mounted configurations. It is possible to interrogate or reconfigure the transmitter without visiting the instrument site.

The Pressure Regulator is a compact self-operated pressure regulator that uses spring force to maintain a differential pressure between the seal and the turbine. Two Pressure Gauges are included; one gauge indicates the pressure under the seal and the other gauge indicates the pressure inside the seal.

The Vent allows the pressure regulator to work in the event of a vacuum condition.

Only stainless steel piping is used. The unit is also equipped with a configuration to by-pass the regulator.

The support plate is made from painted steel or stainless steel.

Keywords: control panel, Pressure Differential, Pressure Regulator, Stainless Steel, Water Control, Water Control Panel, Water Supply,

Contact Fugesco

Email - none provided

Print this page

Other products and services from Fugesco

09-12-2011

Fugesco Inc. - Mechanical Seals - radial

The cover ring can also be designed to act as a reservoir to accumulate water on top of the seal to prevent a dry running condition of the top sealing ring in the event that the turbine is operating under vacuum conditions. For easier installation we recommend the use of an intermediate ring with the stop pins located between the two sealing rings in order to facilitate installation.


09-12-2011

Fugesco Inc. - Mechanical Seals - axial

Our axial type seals are self aligned, balanced split face seals capable of withstanding the heavy torques, pressures, shaft movements and thrusts associated with such shaft systems. The axial direction of the sealing action prevents damage to the turbine or pump shaft, since the wear is taking place between the Seat and the Sealing Rings, and not on the shaft.


09-12-2011

Fugesco Inc. - Mechanical Seals - accessories

One of the many advantages is that it adjusts itself to the thickness between the carbon segments, thus allowing the carbon to be better retained even during heavy vibrations. Since the springs are manufactured in-house, we can easily control our product for better materials, necessary tension, faster delivery terms and better prices.


09-12-2011

Fugesco Inc. - Mechanical Seals - filtration

Our filters have proven themselves for more than twenty-five years and are the result of many years of research and development, which today provides filtration 10 to 20 times finer than that of sand filters now available on the market. Our specialists will recommend the filter with the right capacity for your needs based on the volume of water, flows, available space, all depending on the quantity of seals in your power plant.


09-12-2011

Fugesco Inc. - Mechanical Seals - marine

Our axial type seals are specifically designed for application to stern tube seals, hydroelectric turbines and large water pumps for sewage handling, filtration, irrigation, and more. Our axial type seals are self-aligned, balanced split face seals capable of withstanding the heavy torques, pressures, shaft movements and thrusts associated with such shaft systems.