Fugesco Inc. - Mechanical Seals - accessories

By: Fugesco  09-12-2011
Keywords: Stainless Steel, Seals, Compression Springs

Accessories and Spare Parts

Fugesco can supply spare parts for your existing turbine seals. Our engineering department will study tour existing seal in order to retrofit any existing technology. In many cases we can improve on actual performance by suggesting our solution at the best possible price without changing your actual configuration or seal housings.

Sealing Rings

We can reverse engineer any existing design from our competition with a better surface finish, interchangeability without markings or lapping. With the precision of our manufacturing our sealing rings obtain better sealing with lower leakage during initial start-up and regular operation. We can increase the wear allowance up to 30 % in some cases, without extra leakage.

Pressure Rings

Garter - Compression springs

Since the springs are manufactured in-house, we can easily control our product for better materials, necessary tension, faster delivery terms and better prices.

Stop pins

Fugesco has designed a spring loaded, extensible stainless steel stop pin. One of the many advantages is that it adjusts itself to the thickness between the carbon segments, thus allowing the carbon to be better retained even during heavy vibrations.

Electronic or mechanical wear indicator

Fugesco has mechanical and electronic wear indicators for use in wet and dry applications.

Also available

The following items are available to meet your requirements and can be adapted to fit existing or new installations

  • RTD and temperature probes
  • Pressure gages
  • Electronic and mechanical instruments

Keywords: Compression Springs, Sealing Rings, Seals, Stainless Steel

Contact Fugesco

Email - none provided

Print this page

Other products and services from Fugesco

09-12-2011

Fugesco Inc. - Mechanical Seals - radial

The cover ring can also be designed to act as a reservoir to accumulate water on top of the seal to prevent a dry running condition of the top sealing ring in the event that the turbine is operating under vacuum conditions. For easier installation we recommend the use of an intermediate ring with the stop pins located between the two sealing rings in order to facilitate installation.


09-12-2011

Fugesco Inc. - Mechanical Seals - axial

Our axial type seals are self aligned, balanced split face seals capable of withstanding the heavy torques, pressures, shaft movements and thrusts associated with such shaft systems. The axial direction of the sealing action prevents damage to the turbine or pump shaft, since the wear is taking place between the Seat and the Sealing Rings, and not on the shaft.


09-12-2011

Fugesco Inc. - Mechanical Seals - filtration

Our filters have proven themselves for more than twenty-five years and are the result of many years of research and development, which today provides filtration 10 to 20 times finer than that of sand filters now available on the market. Our specialists will recommend the filter with the right capacity for your needs based on the volume of water, flows, available space, all depending on the quantity of seals in your power plant.


09-12-2011

Fugesco Inc. - Mechanical Seals - marine

Our axial type seals are specifically designed for application to stern tube seals, hydroelectric turbines and large water pumps for sewage handling, filtration, irrigation, and more. Our axial type seals are self-aligned, balanced split face seals capable of withstanding the heavy torques, pressures, shaft movements and thrusts associated with such shaft systems.


09-12-2011

Fugesco Inc. - Mechanical Seals - controlpanel

The Pressure Regulator is a compact self-operated pressure regulator that uses spring force to maintain a differential pressure between the seal and the turbine. A High Signal Magnetic Flow meter System designed to handle difficult high-noise application while maintaining the benefits of dc technology. Two Pressure Gauges are included; one gauge indicates the pressure under the seal and the other gauge indicates the pressure inside the seal.