M&G Duravent : PolyPro

By: Protech Info  09-12-2011

PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 8 in-w.c. 

0" clearance to combustibles for exhaust temperatures up to 194°F / 90°C, and 0" clearance for vertical installations up to exhaust temperatures of 230°F / 110°C and 1/4" / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230°F / 110°C.  PolyPro concentric vent system components, including concentric Horizontal Termination and Vertical Termination, are listed at 0" clearance to combustibles for exhaust temperatures up to 230°F / 110°C.

Materials and Construction
Rigid pipe constructed of 2.2mm (minimum) thick polypropylene.
Flex is double-wall polypropylene.
EPDM or Viton gaskets.

2" (60mm), 3" (80mm),

4" (100mm), 5" (125mm)

Intertek / Warnock-Hersey listed to ULC S636 as a Class IIA, IIB and IIC vent system.

10 years

ISO 9001

Registered by





Other products and services from Protech Info


M&G Duravent : DuraFlex® Stainless Steel

Applications include fireplace inserts, furnaces, boilers, and water heaters. Use with gas, wood pellet, oil, or wood appliances. Smooth wall flexible relining for masonry chimney.


M&G Duravent : FasNSeal

For use with natural gas or propane Categories II, III and IV appliances or Canada's Type BH Gas Vent Systems, having a maximum rated operating temperature of 480°F and a maximum positive pressure of 6" water column. FasNSeal can be used on a wide range of applications including: high-efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters, or tankless water heaters. 8"-12": AL29-4C stainless steel .019.


M&G Duravent : Ventinox

VFT flexible liners are used for upgrading or restoring masonry chimneys that vent Category I natural gas, propane or oil appliances, wood or pellet stoves, fireplaces and fireplace inserts. Continuous weld delivers a strong, air and water tight flue gas conduit. With TherMix or ProFoil insulation 0” clearance for solid fuels. VG Single-wall, .006” super-ferritic stainless steel. VFT Single-wall, .006” 316 stainless steel.