Perkins Lumber - Products and Services
Doors, Plywood, Pine
Pressure Treated Accessories
- Ballisters 2 x 2 x 42" - 45 - both ends
- Ballisters 2 x 2 x 48" - 45 - both ends
- Colonial Spindles 2 x 2 x 36"
- Colonial Post 4 x 4 x 4
- Colonial Post 4 x 4 x 8
- Handrail - 8
- Post Caps
- 1 x 2 x 8 Lattice Cap
- Small Ball & Base
| As well as the dimensional lumber we carry Pressure treated plywood (1/2" and 3/4 " in stock), mini ties, newel posts (4' and 8'), colonial spindles (36"), handrail (8'), stair stringers (3,4,and 5 step), post caps, colonial balls, lattice panels ('1,2',4' x 8' regular 2 ¾ openings 4' x 8' semi-private 1 ¾" openings and 4' x 8' private 1" openings), lattice mouldings, PWF material for wood foundations (available by custom order).
| || CLEARF.J. || #1 Common Knotty || #4 Rough BarnBoard |
| 1 x 2 || STOCK || MILL || MILL |
| 1 x 3 || STOCK || STOCK || MILL |
| 1 x 4 || STOCK || STOCK || MILL |
| 1 x 5 || STOCK || STOCK || MILL |
| 1 x 6 || STOCK || STOCK || MILL |
| 1 x 8 || STOCK || STOCK || STOCK |
| 1 x 10 || N/A || STOCK || STOCK |
| 1 x 12 || N/A || STOCK || STOCK |
| 2 x 2 || N/A || STOCK || N/A |
| 2 x 3 || N/A || STOCK || N/A |
| 2 x 4 || N/A || STOCK || N/A |
| 2 x 6 || N/A || STOCK || N/A |
| 2 x 8 || N/A || STOCK || N/A |
| 2 x 10 || N/A || STOCK || N/A |
| 2 x 12 || N/A || STOCK || N/A |
| 6/4 x 10 || N/A || STOCK || N/A |
| PINE FLOORING ||
| 1 x 6 T&G Match |
(both Red & White Pine)
| N/A || STOCK || N/A |
| 5/4 x 4 T&G Match #1 & #2 || N/A || STOCK || N/A |
| 5/4 x 6 T&G Match #1 & #2 || N/A || STOCK || N/A |
| (Temporary or even long term shortages may occur even to stock items) |
- 5/8 x 4 T&G VJ #1 White Pine
- 5/8 x 6 T&G VJ #1 White Pine
- 5/8 x 6 T&G VJ #1 White Pine CenterVee
- 5/8 x 8 T&G Pickwick Red Pine
- 5/8 x 6 Pickwick Pine - 8
- 3/4 x 6 Cove
- 3/4 x 8 Bevel
- Caribou Pine (14 Sq. Ft.)
We also stock:
- Pine siding 1 x 8 bevel (clapboard)
- 1 x 6 Cove, 1 x 8 Pickwick
- 1 x 4 & 1 x 6 Pine Tongue and groove V - Joint
- Tongue and groove wainscoting packaged
- Pine handrail and accessories
- Clear Pine and Finger Jointed Pine Mouldings
- Clear Pine and Finger Jointed Pine doors and windows (custom orders for some sizes)
- Rough Pine Barn Board
- Pine Flooring
Our competitively priced, high quality spruce lumber is used by hundreds of contractors and thousands of consumers across eastern Ontario annually. One of the reasons that we sell so much is that we do not like poor quality or crooked lumber any better than our customers (we prefer not to sell any material that we would not use ourselves). By ensuring that we provide quality materials we have developed many trusting relationships with area builders.
All of our staff strive to provide exceptional service. Our low turnover of staff equates to experienced people in all departments ( the average experience per employee is almost twenty years to be confirmed?!) ensures that we can provide experienced people to; answer the phone, take the order, answer any questions, load the trucks and deliver the material. Our experience and sincere interest in our customers allows us to know exactly what the customer wants (even when they don't).
The following chart is a guide to some of the framing materials that we carry. Please call for more details as we carry (or can obtain) everything that is required to construct your project including trusses, and floor systems.
- 1 x 2 (8 only) PAD
- 1 x 3 (8,12,16) PAD
- 1 x 4 (8 & 16) PAD
- 2 x 2 (8 only) PAD
- 2 x 3 (8 only) PAD
- 2 x 4 (92 5/8, 8, 104 5/8, 10, 12, 14, 16) K.D.
- 2 x 6 (92 5/8, 8, 104 5/8, 10, 12, 14, 16) K.D.
- 2 x 8 (8, 10, 12, 14, 16) K.D.
- 2 x 10(8, 10, 12, 14, 16) K.D.
- 2 x 12 (12, 16) K.D.
| (Temporary shortages may occur at certain times of year) |
- Various lines and price points
- Large selection in stock and custom order
- Screen Doors (wood and aluminum)
We sell exterior doors and windows from the Donat Flamand (D.F.) collection manufactured by . We prefer their product line becouse of the variety available and their long-standing commitment to quality. These qualities are in line with our own.D.F. offers us a wide range of windows made of wood with vinyl or aluminum claddings or natural wood. They also have a complete line of pure PVC units if you are interested in even lower maintenance. All of these products are available in an almost infinite number of shapes and sizes or operating styles to suite most requirements.
D.F.'s door line is equally versatile with a range of products that swing or slide open for pedestrian traffic.
Madawaska is our main supplier for custom made interior or exterior doors. The approximately three week wait is well worth it for their high quality and value. We carry a full line of interior doors - slabs and fast fit as well as bi-folding doors. Besides the high quality line of doors and windows we do carry a line of more economical steel entrance doors. We also can custom order less expensive windows (although we don't recommend it).
We stock screws: Round Head, Flat Head, Roofing, Drywall, Flooring, Decking, Brass, Stainless Steel, and others.
We also stock nails: common, bright, ardox, box coated, finishing, framing, pneumatic (most are available in galvanized)
We stock over 50,000 Bolts (carriage, lag, hex, in many diameters, and from 1" to 12" long, zinc plated and rust resistant.
Full selection of deck, fence and building hardware (Joist Hangers etc).
- we carry a full line of drywall board and accessories
- Suspended Ceiling components
- many unique components are available by custom order
We stock over 3000 gallons of top of the line paints, stains, and varnishes. We have thousands of colours in stock of;
We also have a complete line of paint sundries such as brushes, rollers, tape, and many more items.
- PPG Paint
- Sikkens Int/Ext Stains
- Olympic Stains
- Cabot Exterior Stains
- Flood CWF
- Trend and Tremclad rust paints
- Minwax and Flecto interior stains and urethanes
In keeping with our efforts to sell quality lumber and building products we strive to provide high quality brand named hand and power tools. Our competitive prices on in stock or special order tools allows us to stock a broad range of tools. We stock mostly well known and respected "national" brands of hand tools and parts. We carry a full line of Makita and other brands of power tools. A full line of pneumatic tools and nails including; Stanley Bostich, Senco, and Allfit are available at very competitive prices.
We stock over 20,000 linear feet of Alexandria mouldings. In stock are many different species including:
There are over 60 different profiles in stock in lengths from seven to sixteen feet. Many more profiles are readily available by custom order. Other species that are available are:
- Finger Jointed or Clear Pine
- pre-primed MDF.
We also deal with other suppliers and service providers who can help us to assist you in matching unusual or older profiles. We suggest that you drop in to see us with the profile that you have.
- Knotty Pine
- raw MDF
Our large inventory of asphalt, metal, and cedar roofing products allows us to service the needs of our contractors and homeowners on a timely affordable basis.
Asphalt shingles are stocked in most colours and profiles. Others are available by special order (usually within a week). All of the accessories to complete your new or replace your old roof are available in stock.
The trend towards reducing maintenance has re-established the market for galvanized (metal) roofing and siding. Metal roofing is ordered on a custom order basis. We can provide galvanized steel or many different colours for roofing or siding. Many different gauges and profiles are available. Since it is custom order we sell it in lengths to the nearest inch, in other words you do not have to cut the pieces to length. Flashings, screws and accessories are also available in the same colour as the steel roofing. We pick up our steel orders on Tuesdays and Thursdays, orders should be in 48 hours prior to these days to receive them on our scheduled pick up dates.
shingles provide the distinguished "rustic" look that appeals to most people. The drawback of course is the cost and effort involved with putting them on. Having said that we do stock a large quantity of (sawn) or shakes (handsplit). Shingles have a smooth finnish and are stocked in a blue label (no.1) for residential or commercial roofs and a red label (no.2) for siding or outbuildings. Shakes have a rough texture look and we keep them in a no.1 grade for roofs or siding.
Our large selection and quantity of plywood allows us to provide most customers with quality plywood in stock and at reasonable prices. Check out our full line of plywood, we carry:
WE carry most of these in 4' x 8' sheets but given notice we are able to mill most of them to the size(s) that you require, all we ask is that you call ahead so that we can schedule the millwork. Most sizes or species of plywood that we do not stock are readily available at our wholesalers, most times we can have the material at our store within eight to thirty-two hours.
- Spruce construction grade
- Fir GIS
- mahogany underlay
- hardwood plywood particle core and plywood core
- MDF, hardboard and particle board
- Baltic Birch
- Pine Wall (T111)
- and many others.
- vinyl siding
- hardwood flooring
- many, many more