Recycling Chutes

By: York Chutes  09-12-2011
Keywords: Door, steel construction, Welded Steel

YTR – York Tower Recycling intake door

2 Hour fire rated door. Warnock-Hersey tested
to CAN4-S104 (ULC-S104), ASTM E-152 and NFPA-252.

  • Bottom hinged, hand operated door
  • Electroplated chrome finish
  • Silent self-closing, self-latching mechanism
  • Rugged handles with chrome plated finishes
  • Welded steel construction throughout: door and
    frame in 11 Ga; basket in 14 Ga
  • Engineered for easy maintenance and parts replacement
  • No exposed fasteners on installed unit
  • Integrated control panel for selective disposal
    (garbage, recycling, organics)

Shipping weight – 37 lbs.

Keywords: Door, Door And Frame, Intake Door, steel construction, Welded Steel, Welded Steel Construction

Contact York Chutes

Email - none provided

Print this page

Other products and services from York Chutes



The Disinfecting and Sanitizing Unit is a tank with a capacity of approximately 4 litres, complete with dispensing valve assembly, generally located abovethe uppermost intake door, which dispenses a concentrated disinfectant fluid into the wash down water, and has an on/off control to permit rinsing as well.



Hi-Pak feature 3 hp electric motor c/w 4" bore hydraulic cylinder. Electrical motor 3/60 - 208/575.


Garbage Chutes

37 lbs.Available sizes of YS model (Custom sizes available upon request. Welded steel construction throughout: door and frame in 11 Ga. Bottom hinged, hand operated door.


Linen Chutes

Rise 60 min. 250°C.Warnock-Hersey tested to CAN4-S104, ASTM E-152 and NFPA-252. Brushed satin finish with silent self-closing, self-latching mechanism. Solidly welded stainless steel: 13 Ga door and frame. SS bottom hinge - garbage intake door also available. Hand operated door with 180° swing. Hour fire rated door with Temp.



Side or bottom hinged doors in 13 Ga welded stainless steel construction with brushed satin finish. Manufactured in Canada to meet the strictest fire standards and current building codes. Chute risers in 16 or 18 Ga aluminum, aluminized steel, satin coat, or stainless steel. Chute support frame with anti-vibration mounting system at each floor. All doors are approved for drywall or masonry installation.



Exhaust fans for garages, roofs and specific rooms such as laundry, elevator, garbage, pool, lockers, and much more. We use the latest plasma and laser for custom cutting and only the newest Auto-Cad software for precise results. Steel plates and platforms in garbage rooms, walkways and under container areas. Manufacturer of high-rise garbage compactors and Bi- or Tri-sorter systems. Safety guards for wall-mounted access ladders and windows.