York Air Conditioning Windsor Furnaces Indoor Air Quality Heat Pumps

By: Total Heating & Cooling  09-12-2011
Keywords: Heating, Air Conditioning, Cooling


The focus at Total Heating & Cooling for complete customer satisfaction on every job means we believe in offering products that we know will give our customers the performance and reliability we would require for our own homes. See below for information about the different indoor comfort control and indoor air quality products we offer.

York® air conditioners are a welcome addition outside and inside your home.
A traditional home comfort system has two parts: an indoor unit, such as a furnace or air handler, and an outdoor unit. An air conditioner is the outdoor unit that cools air and sends it to the indoor unit for circulation through your home. Indoor and outdoor units are designed to work together. When the air conditioner is properly matched with a furnace or air handler, you get maximum efficiency and longer system life.

Count on a York® furnace to give you a warm welcome. Factory assembled, wired, and tested, York® furnaces are built for dependability, economy, and comfort.
Furnaces heat and circulate warm air in the winter. Furnace heating ability is measured with an Annual Fuel Utilization Efficiency (AFUE) percentage. A higher AFUE percentage indicates a more efficient furnace.

York® heat pumps deliver four-season comfort in one stylish unit. They cool your home like an air conditioner in summer, and warm it in the winter like a furnace.
A split system heat pump keeps homes comfortable all year long. In summer, it draws heat out of your home to cool it. In the winter, it draws heat from outside air into your home to warm it.

York ® packaged heating and cooling systems put efficiency and economy in one self-contained unit.
In a packaged system, all equipment is built into an outdoor unit, usually on a concrete slab or other platform. The "package" that gives it its name provides central air conditioning during the summer and heat in colder months.

York ® heat pumps are packaged in one compact cabinet designed for outdoor installation to save space indoors. In warm weather, you'll get up to 13 SEER cooling efficiency depending on the model. In cold weather, heating efficiencies are as high as 7.6 HSPF.


High humidity can also cause mold & mildew through out the house and even ruin very expensive clothes, fabrics, paintings & wall coverings. All air-conditioning units take out some humidity when they are running but in very humid areas this is not enough and you need a dehumidifying system. The most cost effective way in both first cost & operating cost is to install our Affinity System with the T-1900 dehumidifying thermostat.

This system can take out up to 15 times more water from the air than a standard system with very little operating cost penalty.

Evaporator Coils
A traditional home comfort system has two parts: an outdoor unit, such as an air conditioner or heat pump, and an indoor unit, such as a furnace or air handler. The evaporator coil is a series of piping connected to a furnace or air handler that blows indoor air across it, causing the coil to absorb heat from the air. The cooled air is then delivered to the house through ducting. The refrigerant then flows back to the compressor where the cycle starts over again.

York offers evaporator coils for cooling and heat pump applications engineered to be installed with York furnaces and to be matched with York cooling and heat pump outdoor units.

Keywords: Air Conditioning, air quality, Air Quality Products, Cooling, furnace, heat pump, Heat Pumps, Heating, indoor air quality, Indoor Air Quality Products

Contact Total Heating & Cooling

Email - none provided

Print this page