Services

By: Saab Electric  09-12-2011
Keywords: Insurance Companies, Electrical Contractor, Track Record

SERVICES

RESIDENTIAL, NEW CONSTRUCTION, RENOVATIONS, AND ADDITIONS.

SERVICE UPGRADE

We do service upgrades 60Amps to 100 and 200 Amps, 100 to 200Amps

Most insurance companies will not insure a newly acquired house if the service size is 60 Amps.

WIRING

If you are a General Contractor looking for a reliable, dependable, and knowledgeable electrical contractor with a proven track record of getting the job done on time or if you are building your own dream home and you need an electrical contractor, we certainly can help.

Work can be carried out according to the original design drawings if available. otherwise a system can be designed with your requirements and input. All work will be done according to the Ontario Electrical Code. You may want to install pot lights, under cabinet lights or any non-standard fixtures and devices.

There usually is a rough in inspection by the Electrical safety Authority (ESA) inspector. When the devices are installed and the house is ready to be occupied a final inspection is carried out and a certificate of inspection is issued.

REWIRING

if your house still has knob and tube wiring and you would like to rewire it for insurance purposes or just for the safety of your family. We sure can do that. We will remove all old wiring and install new wires and devices. This may involve making some openings in some walls and ceilings.

Some insurance companies will not insure a newly acquired house if it has knob and tube wiring.

FUSE BOXES TO BREAKER PANELS

SERVICE CALLS

For all your electrical repairs, you can give us a call and we’ll be happy to assist you.

COMMERCIAL, NEW CONSTRUCTION, RENOVATIONS AND ADDITIONS.

Our list of projects and customers include office buildings, restaurants, community centres, clinics, and medical labs.

POWER AND LIGHTING

We have laid duct banks from property lines to the transformer foundation, installed transformer foundations, and ran duct banks from transformer foundation to the electrical room inside the building. We ran cables from the pad mount transformer to the electrical room. The grounding of the pad mount transformer was installed using grounding rods and grounding wires.

Disconnects of many sizes and types (ex: 400A, 3pole, 4 wire, fusible) used as main service disconnects were installed and grounded with either grounding plates or water meter pipes as the situation would allow.

Various sizes of 600V-/120V/208V transformers were installed. Ground and ceiling mounted. The support, grounding, disconnects, and wiring of the transformers were carried out.

Splitters of various sizes and ampacities were put in and distribution to load centres or equipment was done through fusible disconnects.

HVAC UNITS

The roof top heating and air conditioning units (mainly 600V,3phase) were fed either from fusible disconnects or breakers in the electric room with a weather proof non fusible disconnect on the unit itself.

FIRE ALARM INSTALLATIONS

Part of many projects that Saab Electric has done was the installation of fire alarm systems including conduit work, fire alarm panels, annunciator panels, devices such as smoke detectors, heat detectors, pull stations, horns, strobes, duct smoke detectors, sprinkler system pressure and valve control.

Keywords: Electrical Contractor, Insurance Companies, Track Record

Contact Saab Electric

Email - none provided

Print this page