Fabrication Products & Equipment | Canadian Manufacturing

By: Canadian Manufacturing  09-12-2011

Products and Equipment

WAGO Corp.’s 859 DIN-rail timer relay module offers on-/off-delay timer modes and multiple time ranges for diverse applications. ON November 4, 2011 1:53 PM

Harsh conditions in processing plants are hard on visualization systems. Control room HMI that can take the heat and whatever else hazardous locations offer on the process floor is now available. ON November 4, 2011 1:49 PM

The Bio-Circle system from Montreal-based Walter Surface Technologies uses bioremediation rather than solvents to clean machine parts. ON November 4, 2011 1:44 PM

The Canadian Centre for Occupational Health & Safety (CCOHS) reports some US statistics show skin disorders comprise more than 35% of all occupationally related diseases. In Ontario, there have been 1,000 compensation claims reported annually for contact dermatitis. ON November 4, 2011 1:40 PM

Sensitive safety equipment such as respirators need to be protected. Allegro Industries’ Hi-Viz Heavy Duty SCBA wall cases shield gear from dust, moisture and damaging plant environments. ON November 4, 2011 1:33 PM

Yokogawa Electric Corp. has enhanced its ProSafe-RS safety instrumented system for plant operations in oil, natural gas, petrochemical and other process industries. ON November 4, 2011 1:29 PM

The Earth-Rite TELLUS II from Newson Gale Inc. provides constantly verified static ground monitoring for drums, IBCs and other mobile or portable equipment used in hazardous area operations. ON November 4, 2011 1:26 PM

Allen-Bradley NEMA and IEC Centerline low-voltage motor control centres (MCCs) from Rockwell Automation seamlessly exchange data between plant-floor devices and business-level systems. ON June 30, 2011 12:46 PM

Baldor Electric Co. has added a compact IP65-rated operator panel with a CANopen interface to its motion control products. ON June 30, 2011 12:45 PM

The VLT Automation VT Drive from Danfoss VLT Drives saves energy, reduces operating costs and maximizes uptime in industrial variable torque fan, pump, blower and compressor applications. ON June 30, 2011 12:38 PM

Keep track of all ethernet-networked drives with drive.web, an ethernet-based control technology for DC drives. ON June 30, 2011 12:21 PM

Food-grade FluoroNyliner bushing bearings from Thomson Linear Bearings & Guides are engineered to last in harsh washdown environments. ON June 30, 2011 11:58 AM

ADAPT bearings have passed a rigorous road test, surpassing a critical mark in caster application. ON June 30, 2011 11:51 AM

When a mechanical issue arises and maintenance pros are called upon to troubleshoot, tight budgets and time constraints can get in the way of a prompt diagnosis. ON June 30, 2011 11:17 AM

Mitsubishi Forklift Trucks in Houston has developed two special heavy duty forklifts with radiation-shielded cabins to handle contaminated rubble at the Fukushima Daiichi Nuclear Power Station. ON June 30, 2011 9:29 AM

CNC Software Inc. has added a CAM application that runs seamlessly in Solidworks. ON May 13, 2011 4:06 PM

The RIO-47100 pocket PLC, an intelligent input and output controller for the ethernet from Galil, communicates with many devices including the company’s DMC-40x0 ethernet motion controllers. ON May 13, 2011 4:03 PM

Two series of safety light curtains (active optoelectronic protective devices) from AutomationDirect, a Cumming, Ga. supplier of automation technologies, protect people, and ensure product/machine safety where risks can’t be eliminated by machine design or the process might require frequent, open access during operation. ON May 13, 2011 3:45 PM

Online software can improve the efficiencies of inbound deliveries ON May 5, 2011 4:38 PM

All we can say is wow, The 2011 Lamborghini Aventador is awesome. Watch the video. ON May 3, 2011 12:23 PM

Contact Canadian Manufacturing


Print this page

Other products and services from Canadian Manufacturing


Design Engineering Products & Equipment

Modicon M168 controller enhances design, functionality and reliability of HVACR equipment ON September 14, 2011 2:57 PM. Marsh Bellofram ON Delay Industrial Interval Timer features instantaneous relay and 12 timing ranges in a single unit. Beckhoff EL7201 Terminal permits direct connection of a servomotor and resolver to a 12 mm EtherCAT Terminal. Weidmuller DIN-rail mountable SPD II and SPD III feature local and remote self-monitoring.


Food Manufacturing Products & Equipment

S+S Inspection now offers a new X-Ray inspection system with real-time software and bottom-up shoot configuration ON September 25. Gelita unveils its collagen proteins for beauty, joint health, calorie management and texture ON September 26, 2011 12:00 PM. Suppliers such as Galactic and Sensient offer processors innovative and healthy solutions ON November 17.


Metalworking Products & Equipment | Canadian Manufacturing

Embraer S.A. and Alcoa have announced they have signed a new technology sharing agreement that will utilize Alcoa’s proprietary aluminum alloys, advanced design and manufacturing techniques, and its fastener technologies to support Embraer’s development of new high-performance metallic fuselage and wing solutions for its family of aircraft.


Plastics & Coatings Products & Equipment

For high-density polyethylene in blown film, extrusion blow molding and injection molding ON January 18, 2011 10:27 AM. Comet Plastic Equipment, LLC’s new mold monitoring system has a processing time of 0.003 seconds. For plastics, packaging, automotive and medical industries ON November 30, 2010 10:42 AM. New automatic features on Proco packaging system ON April 11. For film, sheet scrap ON January 10, 2011 11:37 AM.