BROWN BOGGS - mech eccentric gear

By: Brown Boggs  09-12-2011

Eccentric Gear

BROWN BOGGS Eccentric Gear presses are designed as a four-piece, steel fabricated construction comprising of the bridge, slide, bed and, columns. Built in either 2 or 4 point configurations, they range in capacity from 600 to 1600 Tons with bed sizes to 252" left to right

All major weldments are stress relieved before machining. The bridge, bed and columns are precisely aligned at assembly by five fitted keys on each end, and held together by means of four hydraulic tie rods. Due to the excessive shock loading present with blanking and progressive die operations, all press weldments are extra heavy duty, all electrical components on the press are shock mounted where practical, critical fasteners are oversize and wired, and press clearances are kept to the minimum for running fit.

Other products and services from Brown Boggs


BROWN BOGGS - mach crank steel

Flywheel type presses are rated at full capacity 1/16" off bottom of stroke, while Single and Twin End Driven geared type presses have full rated capacity at ¼" and ½" off bottom of stroke respectively. BROWN BOGGS Heavy Duty Straight Side presses range in capacity from 150 to 1000 Tons with bed sizes to 216" left to right at speeds up to 300 Strokes Per Minute. BROWN BOGGS offers a variety of Heavy-Duty press designs.