Manchester Tank: Propane Hand Burners

By: Manchester Tank  09-12-2011
Keywords: Stainless Steel

> > > Propane Hand Burners

OUR PROPANE HAND BURNERS contain the following features:


  • The Handiboy Burner valve is the best value on the market. A special recessed orifice makes it virtually wind-proof, and a brass needle valve allows the operator to control the flame up to 500,000 BTUs.


  • The Power Jet is a patented 3' burner with an adjustable needle valve pilot, providing maximum wind control and stability. The operator has complete control of the length and the amount of flames at his finger tips. Capacity: 750,000 BTUs.


  • The Super "8" is an 8' long, lightweight (4 lbs.) heavy-duty burner. It utilizes tank pressure, has an adjustable stainless steel pilot and squeeze trigger valve for total operator control in irrigation ditches, turn rows, fence undergrowth, and heavy brush in fire breaks, culverts, and roadsides.
  • For professional use by experienced farmers, firemen, city or county road departments, and contractors. Burner capacity is 20 gallons per hour, or 1,800,000 BTUs.
Catalog No.Descriptionlb
8062  Handiboy Burner Bubble Pack Kit Includes: Handiboy
Burner, Excess Flow POL & 10' Hose Assembly. UL Listed.
8053  Handiboy Burner500,000527,50021
8017  3' Power Jet Hand Burner750,000791,2502.54
8061  Bubble Pack Kit Includes: 3' Power Jet Hand Burner,
Regulator Gauge & 10' Hose.
8012  Super 8' Power Jet Hand Burner2,000,0002,110,00044

Keywords: Stainless Steel

Contact Manchester Tank

Email - none provided

Print this page

Other products and services from Manchester Tank


Manchester Tank: Forklift & Buffer Cylinders

>> Forklift & Buffer Cylinders OUR FORKLIFT & BUFFER CYLINDERS contain the following features. Permanently positioned relief valve with a clear path to the outside of the cylinder. Forklift cylinders have Lifetime Warranty on dip tubes. Quick Coupler installed on all forklift cylinders. Aluminum forklift cylinders are shot blasted.


DOT Tanks Manufacturer Department of Transportation DOT Compliance Tanks

> DOT Products THE U.S. DOT (DEPARTMENT OF TRANSPORTATION) controls the jurisdiction of the transportation of hazardous goods in commerce in the United States. Manchester Tank cylinders conform with strict compliance to DOT specifications 4BA, 4BW, and 4E. These specifications are in the U.S. Code of Federal Regulations - Title 49.


Compressed Air Tanks Pressure Vessels Air Receivers

Capable of producing pressure vessels, compressed air tanks, and air receivers as small as 2" in diameter at 3,000 PSI to as large as 120" in diameter at 300 PSI. > Pressure Vessels & Air Receivers OUR PRESSURE VESSELS, COMPRESSED AIR TANKS, AND AIR RECEIVERS contain the following features. Most ASME pressure vessels, compressed air tanks, and air receivers are approved for use in Canada.


Manchester Tank: 5#-420# Steel Cylinders

State-of-the-art cylinder facilities in the U.S.A.


Manchester Tank: Refrigerant Cylinders

3/4" NPT Vapor Service Valve - 3/4" NPT liquid service valve, 1" NPT 450 PSI relief valve, 3/4" plugged openings for liquid level switch, bottom drain & screw cap. Dual Port Valve - separate relief valve, visible liquid level gauge & two 3/4" plugged openings. Y Valve - 3/4" plugged opening for liquid level switch & 1/4" plugged opening for air valve. > Refrigerant Cylinders OUR REFRIGERANT CYLINDERS CONTAIN THE FOLLOWING FEATURES.