Refrigeration - Kerenor Energy Solutions

By: Kerenor  09-12-2011
Keywords: carbon emissions

Regrettably, most refrigerators still use air temperature as the signal to control the refrigeration cycle (i.e. when the fridge starts and stops). They have been doing that for over 100 years. But we don’t buy fridges to cool air. We buy them to cool food. So we should use food temperature as the signal to control the refrigeration cycle. Would that make a difference?

Absolutely! Air temperature rises far more rapidly than food temperature so refrigeration cycles are more frequent than they need to be to maintain the required temperature. The result is excessive energy consumption.

The Chilled Unit Energy Saver solves this 100 year old problem! It is a non-toxic wax food simulant contained in a protective enclosure that mimics food temperature. Once in place, the Chilled Unit Energy Saver transforms the fundamental operation of the refrigerator because it will now use food temperature as the signal to control its refrigeration cycle rather than changeable air temperature.

The effect is a more efficient refrigeration cycle, where the individual cycle lasts longer but the frequency is reduced by up to 80%. This can result energy savings of up to 33% without any compromise to food safety and quality.

Benefits of the Chilled Unit Energy Saver:

  • Savings of up to 33% Resulting in Swift Paybacks
  • Simple Installation with Zero Maintenance
  • Increases Equipment Lifespan, Reduces Breakdowns
  • Reduces Carbon Emissions
  • No Compromise to Food Quality and Safety - NSF Approved

Keywords: carbon emissions

Contact Kerenor

Email - none provided

Print this page

Other products and services from Kerenor

09-12-2011

Motors - Kerenor Energy Solutions

Our IMEC (intelligent motor energy controllers) solutions have been used to help thousands of customers to eliminate waste from motor driven system and thereby reduce energy and maintenance costs along with carbon emissions. Energy Savings of up to 50.


09-12-2011

Air Conditioning - Kerenor Energy Solutions

So running the system continuously until the room thermostat switches it off means that the system operates with excess capacity most of the time. When ACES switches into “saver mode”, the fan keeps running and your system makes maximum use of the stored cooling energy in the heat exchanger. Typical air conditioning systems operate continuously until the room thermostat senses the desired temperature and turns the system off.


09-12-2011

Lighting - Kerenor Energy Solutions

The solution is LESS – An intelligent Light Energy Saving System which uses a combination of cutting-edge control technology and state-of-the-art sensors. Conventional lighting offers limited control of the energy it uses – in addition to excess cost this produces excess heat which damages your equipment. LESS employs 'Daytronic' ballasts and sensors which dynamically adjust your lighting to deliver a guaranteed illumination level at all times.


09-12-2011

Eniscope - Kerenor Energy Solutions - eniscope

Eniscope combines world-class metering technology with an advanced energy network controller; putting live readings and real-time graphical logs within reach, 24 hours a day, from your desktop, laptop or mobile phone. Eniscope is a unique energy analyzer, which plugs into your system and relays meaningful energy use data and graphical analysis locally and over the web.


09-12-2011

Eniscope - Kerenor Energy Solutions - products

Wall-mounted neatly alongside your building’s fuse board, Eniscope’s compact, self-contained casing combines world-class metering technology with its own, highly secure web server; putting live readings and real-time graphical logs within reach, 24 hours a day, from your desktop, laptop, PDA or mobile phone.