Lighting - Kerenor Energy Solutions

By: Kerenor  09-12-2011
Keywords: Energy Saving, Maintenance Costs

If you have a conventional lighting set-up you could be wasting over 50% of all the energy it consumes!

Conventional lighting offers limited control of the energy it uses – in addition to excess cost this produces excess heat which damages your equipment. It is also unable to respond to occupancy changes meaning lights are left on unnecessarily. In addition, conventional lighting cannot intelligently compensate for the presence of natural daylight resulting in over-illumination – this means light is produced whether you need it or not.

The solution is LESS – An intelligent Light Energy Saving System which uses a combination of cutting-edge control technology and state-of-the-art sensors. A typical LESS installation would look like this:

Occupancy Sensors

One of the biggest energy wasters is lights being left on when a room is not in use. Major Improvements in sensitivity and reliability have transformed the primitive 'Motion Sensing' approach into high comfort Occupancy Sensing. This means your lights automatically turn on when a room is occupied and off when its vacant - so you only have light when you actually need it.

Daylight Dimming Sensors & Ballasts

In most buildings the lights are on at full intensity all day even when there is plenty of daylight available. This not only wastes energy but causes unpleasant over-lighting. LESS employs 'Daytronic' ballasts and sensors which dynamically adjust your lighting to deliver a guaranteed illumination level at all times. The control is graduated so all you notice is an improved lighting environment and lower bills.

High-Efficiency Lamps

As part of a LESS installation we aim to replace any inefficient lamps. For example, conventional Emergency Exit Signs must be permanently lit resulting in high energy and maintenance costs (the lamps, ballasts and batteries require regular maintenance and replacement). Our LED Exit Signs eliminate 100% of the maintenance costs and reduce electricity costs by over 80%.

Benefits you could experience with LESS include:

  • Total Energy Savings of Over 50% Possible
  • Short Payback Times
  • Suitable For Retrofits or New Buildings
  • Quick & Simple Installation
  • Combine Savings & Comfort
  • Proven in Thousands of Installations
  • Stylish Design, Very Small, Elegant Integration
  • Developed and Manufactured to Highest Quality Standards

Keywords: Energy Saving, Maintenance Costs

Contact Kerenor

Email - none provided

Print this page

Other products and services from Kerenor


Refrigeration - Kerenor Energy Solutions

The Chilled Unit Energy Saver transforms the fundamental operation of the refrigerator because it will now use food temperature as the signal to control its refrigeration cycle rather than changeable air temperature. Air temperature rises far more rapidly than food temperature so refrigeration cycles are more frequent than they need to be to maintain the required temperature.


Motors - Kerenor Energy Solutions

Our IMEC (intelligent motor energy controllers) solutions have been used to help thousands of customers to eliminate waste from motor driven system and thereby reduce energy and maintenance costs along with carbon emissions. Energy Savings of up to 50.


Air Conditioning - Kerenor Energy Solutions

So running the system continuously until the room thermostat switches it off means that the system operates with excess capacity most of the time. When ACES switches into “saver mode”, the fan keeps running and your system makes maximum use of the stored cooling energy in the heat exchanger. Typical air conditioning systems operate continuously until the room thermostat senses the desired temperature and turns the system off.


Eniscope - Kerenor Energy Solutions - eniscope

Eniscope combines world-class metering technology with an advanced energy network controller; putting live readings and real-time graphical logs within reach, 24 hours a day, from your desktop, laptop or mobile phone. Eniscope is a unique energy analyzer, which plugs into your system and relays meaningful energy use data and graphical analysis locally and over the web.


Eniscope - Kerenor Energy Solutions - products

Wall-mounted neatly alongside your building’s fuse board, Eniscope’s compact, self-contained casing combines world-class metering technology with its own, highly secure web server; putting live readings and real-time graphical logs within reach, 24 hours a day, from your desktop, laptop, PDA or mobile phone.