Yarlmetal Fabrications Inc - prod fpanels

By: Yarlmetal  09-12-2011
Keywords: Stainless Steel, Aluminium, sheets

Aluminium is quite popular for use in metal panels, or enclosures of buildings for several reasons. It is very ductile, and pliable for creating forms. Its lightweight does not compromise strength, as some aluminium alloys are known to be stronger than structural steel. It can also be easily maintained with detergent and water, and does not corrode or flake. In comparison with other choices, it is the final clean finish, and cost effectiveness, which make this metal a remarkable choice for exterior cladding. Other materials such as stainless steel are also available.


  • Exterior wall panels
  • Store front panels
  • Column covers
  • Beam enclosures
  • Fascias
  • Escalator panels
  • Wall trim


  • Aluminium
    The following aluminium finishes are offered as standard:
    • Anodized finishes: Architectural Class 1, 20 um (.0007") or Class 2, 10 um (.0004") in clear or standard colours.
    • Paint finishes: PPG Duranar fluorocarbon coatings containing Kynar 500* resin in a wide range of architectural colours.
    • Sizes
      • Anodized quality of 0.125" thickness comes in sheets 60" maximum width
      • All other anodized quality comes in sheets of 48" maximum width
      • Paint quality of 0.125" thickness comes in sheets of 72" maximum width
      • All other paint quality comes in sheets of 60" maximum width
  • Stainless Steel
    • 304-#4 brush finish, XL Blend S, XL buff polished
    • Sizes
      • 22 gauge to 12 gauge
      • Maximum width for sheets is 60"

Keywords: Aluminium, Column Covers, Gauge, sheets, Stainless Steel

Other products and services from Yarlmetal


Yarlmetal Fabrications Inc - prod bpans

45-degree angle pans to accommodate building corners, and corresponding clips with a slight angle are made to act as a drip to keep moisture from entering the building. Most common insulation has "R" value 4/ inch Thickness of insulation will vary depending on the R factor, type of insulation and pan depth. The effectiveness of the insulation is measured by the R-Value, which expresses the amount of heat that is kept within the system.


Yarlmetal Fabrications Inc - prod ipanels

The laminating metal, the insulating material, and thickness are all variables that produce a wide array of choices to meet specific customer requirements. It is easy to install in curtain wall in place of spandrel area because the insulated panel is mostly 1" overall size. Yarl Metal provides several options for insulated panels. 24 gauge galvanized steel and seldom light gauge Aluminum. It is used for the storefronts also.


Yarlmetal Fabrications Inc - prod colcover

Interior and exterior structural columns of various materials, shapes and sizes can be covered to enhance the aesthetic appearance of a building. They serve as a cost-saving measure because they are durable and easy to maintain. The column covers may be produced as half circles or quarter circles. 16 gauge to 11 gauge.


Yarlmetal Fabrications Inc - prod bshapes

The ductility of metal makes this a versatile, practical choice and is preferred by architects, builders and designers. Formed metal is used as an aesthetic option that is cost effective and easy to maintain. Yarl Metal produces several formed shapes to meet client specifications. 22 gauge to 12 gauge.


Yarlmetal Fabrications Inc - product overview

Use of metals to enhance the architectural view has steadily increased over the years, especially in the last couple of decades, which have seen many creative applications by the fabrication companies. In keeping with the growing demand, Yarl Metal manufactures a variety of products for the building trade. Meeting customers' specifications is the number one consideration in our product design and manufacture.