Image Video - gsi

By: Image Video  09-12-2011

Building on the success of the GSI-1 and GSI-2 tally controllers, the GSI-3 adds UMD support, as well as an expanded matrix size.  The user can create a GPI routing matrix up to 240 x 240.  The GSI-3 provides a serial interface to popular production switchers, such as GVG4000, SONY MVS-8000, Thomson Kalypso, and DD35

  • Cost effective tally and GPI routing solution
  • Serial interface to supported switchers
  • Pre-defined configurations and tally layouts may be recalled from stored files
  • GPI state is maintained in non-volatile memory in the event of a power failure
  • Easily configured via a Windows PC running the supplied tally console software
  • Uses Image Video standard 4211 GPI interface units for GPI matrices up to 240 x 240
  • Output relays in the 4211 parallel interface may be controlled by any combination of switcher crosspoints and GPI inputs

Contact Image Video

Email - none provided

Print this page

Other products and services from Image Video


Image Video - tsi

The TSI-1000 collects information from signal routing and processing equipment to operate displays and tallies as directed by its internal configuration information. The TSI-1000 is configured from a Windows PC running the Tally System Console 2 program. At the heart of the IMAGE VIDEO Tally System is the TSI-1000 Tally System Interface. All electronics housed in two rack unit frame. Four RJ11 remote display ports.


Image Video - ecp i o connection panel

Front Panel switch to select dry input and dry pull-up power source. LED status indicator for each input and dry input pull-up supply. LED staus indicator for each output and output wettign supply. Inputs are individually switch selectable as wet or dry. Way binding posts for each output and external supply.