SITTM Inc. | Products

By: SITTM Technologies  09-12-2011
Keywords: Carbon, Production Of Biodiesel, Asphalt Release Agent,

SITTM Concrete Release Agent

Consists of two formulations for year round use. Both formulations are 100% biodegradable, low-toxicity, and low VOC. They can be used on a variety of materials providing a clean release preventing buildup, and produce a smooth, high quality, stain-free finish. The SITTM Warm Weather formulation is effective to 0°C; with the Cold Weather formulation to -15°C. The low toxicity and VOC of this product lend itself to work very effectively as a shot-crete release agent in underground mining conditions. The products can be applied by spraying, rolling or dipping.

SITTM Asphalt Release Agent

Consists of two formulations for year round use. Both formulations contain no petroleum, are 100% biodegradable, non-toxic, and low VOC. The products can be diluted up to 8:1 with water, and applied to all types of paving equipment and tools. It works with all types of asphalt mixes, doesn’t dry out, and reduces clean-up time. The product is also highly economical. The warm weather formulation is effective to 0°C; the cold weather formulation to -15°C.

SITTM Parts Cleaner/Degreaser

Contains no petroleum or mineral spirits, is 100% biodegradable, non-corrosive, non-toxic, low VOC and non-hazardous. The product efficiently cleans all types of parts, tools and equipment of grease, resins, other saps or tars. It can be used on all types of materials and is highly economical.


Coming Soon..

SITTM Biodiesel Production Unit

Information Coming Soon!

Gasification

Harnessing the most energy from carbonic materials increases the competence of any operation.  Gasification can convert carbonaceous biomass materials into gases (e.g. carbon monoxide, hydrogen, carbon dioxide etc.) that can be more efficiently converted into electricity.  Gasification can also use previously burned carbon that has not been fully combusted, therefore making use of materials that would have previously been considered as waste.  SITTM Technologies has used its innovative product design practices to create a gasification unit the will optimize the efficient use of carbonic materials for energy needs.

Glycerin Burning

Glycerol, a byproduct from the production of biodiesel has a healthy BTU value and can be used to meet energy needs.  When used as a heating application and individual or commercial setting could benefit from this efficient and clean burning alternative.  SITTM Technologies will bring to the market place a small-scale unit to efficiently burn glycerol and convert it into an affordable and clean energy to be used by biodiesel producers.

Keywords: Asphalt Release Agent, Biodiesel Production Unit, Carbon, Production Of Biodiesel,

Contact SITTM Technologies

Email

Print this page

Other products and services from SITTM Technologies

09-12-2011

SITTM Inc. | Snow/Ice/Slush Release Agent

For spray method, we recommend the CHAPIN 8001 spray tip that produces a flow of 1/10 of one gallon per minute. Remove excess dirt or debris from surfaces before applying. A 20L pail will cover 600-1500 sq. Cold weather tolerant to -15°C.


09-12-2011

SITTM Inc. | Parts Cleaner/Degreaser

If you clean rubber parts from pre-1994 with this cleaner, do not allow them to soak for extended periods of time. Contains no petroleum products or mineral spirits.


09-12-2011

SITTM Inc. | Concrete Release Agent - concrete release agent cold weather

For spray method, we recommend the CHAPIN 8001 spray tip that produces a flow of 1/10 of one gallon per minute. Rust and dirt from forms and surfaces before applying. Provides a clean release, preventing buildup. A 20L pail will cover 600-1500 sq. Cold weather tolerant to -15°C.


09-12-2011

SITTM Inc. | Concrete Release Agent - concrete release agent warm weather

For spray method, we recommend the CHAPIN 8001 spray tip that produces a flow of 1/10 of one gallon per minute. Rust and dirt from forms and surfaces before applying. A 20L pail will cover 600-1500 sq.


09-12-2011

SITTM Inc. | Asphalt Release Agent - asphalt release agent cold weather

Apply by brush, roller, spray or by dipping tools in the release agent immediately before use. Can be used on dump beds, pavers, rollers, tools, spreader bars, belts and conveyors. SITTM Asphalt Release Agent is safe to use under normal applications. Works with all types of asphalt mixes. Does not dry out once applied.


09-12-2011

SITTM Inc. | Asphalt Release Agent - asphalt release agent warm weather

Can be used on dump beds, pavers, rollers, tools, spreader bars, belts and conveyors. Residual effect allows for lighter repeat applications through the day. SITTM Asphalt Release Agent is safe to use under normal applications. Works with all types of asphalt mixes. Does not dry out once applied.


09-12-2011

SITTM Inc. | Biodiesel Sales

SITTM Technologies encourages local production of biodiesel and will soon be supplying companies with the fuel to help make Sault Ste. Mare, ON the Alternative Energy Capital of North America. We are working collaboratively with producers, processors and other consumers to produce the fuel and boost the local economy. SITTM Technologies is moving forward with its plan to investigate locally-sourced feedstock to produce biodiesel.