SITTM Inc. | Parts Cleaner/Degreaser

By: SITTM Technologies  09-12-2011
Keywords: environmentally friendly, Petroleum Products, Technical Information

Technical Information
Test Method Results
Flash Point D93 97°C
Methanol Content EN4110 0.018%
D445 4.1
Cloud Point D5773 0°C
Copper Strip Corrosion D130 1A
Carbon Residue D4530 0.01%
Water & sediment D2709 0.001%

Environmentally Friendly

  • Contains no petroleum products or mineral spirits
  • Safe
  • 100% biodegradable
  • Non-corrosive
  • Non-toxic
  • Low VOC

Superior Quality

  • Efficiently cleans all types of parts, tools, equipment of grease, resins, other saps, or tar.
  • Can be used on all types of materials

Easy to Apply

  • Do not dilute.
  • Clean Excess grease, rust and dirt before using.
  • If you clean rubber parts from pre-1994 with this cleaner, do not allow them to soak for extended periods of time

Safe to Use

  • This product is non-toxic and non-hazardous.
  • For any concerns, consult the MSDS for further information.
  • Not recommended for extended exposure on finished surfaces

Français:

Contact Information P: (705) 253-6884
F: (705) 253-9572
E:
Headquarters 103 Metig Street
Blue Heron Industrial Park
Sault Ste. Marie, ON P6A 5K9
Canada

Keywords: Copper Strip Corrosion, environmentally friendly, No Petroleum Products, Petroleum Products, Technical Information,

Contact SITTM Technologies

Email

Print this page

Other products and services from SITTM Technologies

09-12-2011

SITTM Inc. | Snow/Ice/Slush Release Agent

For spray method, we recommend the CHAPIN 8001 spray tip that produces a flow of 1/10 of one gallon per minute. Remove excess dirt or debris from surfaces before applying. A 20L pail will cover 600-1500 sq. Cold weather tolerant to -15°C.


09-12-2011

SITTM Inc. | Concrete Release Agent - concrete release agent cold weather

For spray method, we recommend the CHAPIN 8001 spray tip that produces a flow of 1/10 of one gallon per minute. Rust and dirt from forms and surfaces before applying. Provides a clean release, preventing buildup. A 20L pail will cover 600-1500 sq. Cold weather tolerant to -15°C.


09-12-2011

SITTM Inc. | Concrete Release Agent - concrete release agent warm weather

For spray method, we recommend the CHAPIN 8001 spray tip that produces a flow of 1/10 of one gallon per minute. Rust and dirt from forms and surfaces before applying. A 20L pail will cover 600-1500 sq.


09-12-2011

SITTM Inc. | Asphalt Release Agent - asphalt release agent cold weather

Apply by brush, roller, spray or by dipping tools in the release agent immediately before use. Can be used on dump beds, pavers, rollers, tools, spreader bars, belts and conveyors. SITTM Asphalt Release Agent is safe to use under normal applications. Works with all types of asphalt mixes. Does not dry out once applied.


09-12-2011

SITTM Inc. | Asphalt Release Agent - asphalt release agent warm weather

Can be used on dump beds, pavers, rollers, tools, spreader bars, belts and conveyors. Residual effect allows for lighter repeat applications through the day. SITTM Asphalt Release Agent is safe to use under normal applications. Works with all types of asphalt mixes. Does not dry out once applied.


09-12-2011

SITTM Inc. | Products

SITTM Technologies has used its innovative product design practices to create a gasification unit the will optimize the efficient use of carbonic materials for energy needs. They can be used on a variety of materials providing a clean release preventing buildup, and produce a smooth, high quality, stain-free finish.


09-12-2011

SITTM Inc. | Biodiesel Sales

SITTM Technologies encourages local production of biodiesel and will soon be supplying companies with the fuel to help make Sault Ste. Mare, ON the Alternative Energy Capital of North America. We are working collaboratively with producers, processors and other consumers to produce the fuel and boost the local economy. SITTM Technologies is moving forward with its plan to investigate locally-sourced feedstock to produce biodiesel.