SITTM Inc. | Concrete Release Agent - concrete release agent cold weather

By: SITTM Technologies  09-12-2011
Keywords: environmentally friendly, Technical Information, Personal protective equipment

Technical Information
Test Method Results
Flash Point D93 97°C
Methanol Content EN4110 0.018%
D445 4.1
Cold Flow Point
-15°C
Copper Strip Corrosion D130 1A
Carbon Residue D4530 0.01%
Water & sediment D2709 0.001%

Environmentally Friendly

  • 100% biodegradable
  • Non-toxic
  • Low VOC

Superior Quality

  • Provides a clean release, preventing buildup
  • Produces smooth, high-quality, stain-free finish
  • Can be used on a variety of materials and surfaces
  • Pleasant citrus odor

Tolerant to Cold

  • Cold weather tolerant to -15°C
  • If stored below -15°C, condition by placing in warm location (>0°C) for approximately one hour before using
  • If stored in extreme cold, product may require mixing after conditiong

Easy to Apply

  • Do not dilute.
  • Remove excess concrete, rust and dirt from forms and surfaces before applying.
  • Apply to all form types using spray, dip, roll-on or brush methods
  • For spray method, we recommend the CHAPIN 8001 spray tip that produces a flow of 1/10 of one gallon per minute.
  • Depending on the application method, a 20L pail will cover 600-1500 sq. ft.

Safe to Use

  • This product is non-toxic and non-hazardous.
  • Wear the appropriate personal protective equipment for the application method.
  • For any concerns, consult the MSDS for further information.
  • Not recommended for extended exposure on finished surfaces

Available in 20L pails or 208L drums
All pricing FOB Sault Ste. Marie, Ontario
Freight negotiable on large orders

Français:

Keywords: Copper Strip Corrosion, environmentally friendly, Personal protective equipment, Protective Equipment, Spray Tip, Technical Information,

Contact SITTM Technologies

Email

Print this page

Other products and services from SITTM Technologies

09-12-2011

SITTM Inc. | Snow/Ice/Slush Release Agent

For spray method, we recommend the CHAPIN 8001 spray tip that produces a flow of 1/10 of one gallon per minute. Remove excess dirt or debris from surfaces before applying. A 20L pail will cover 600-1500 sq. Cold weather tolerant to -15°C.


09-12-2011

SITTM Inc. | Parts Cleaner/Degreaser

If you clean rubber parts from pre-1994 with this cleaner, do not allow them to soak for extended periods of time. Contains no petroleum products or mineral spirits.


09-12-2011

SITTM Inc. | Concrete Release Agent - concrete release agent warm weather

For spray method, we recommend the CHAPIN 8001 spray tip that produces a flow of 1/10 of one gallon per minute. Rust and dirt from forms and surfaces before applying. A 20L pail will cover 600-1500 sq.


09-12-2011

SITTM Inc. | Asphalt Release Agent - asphalt release agent cold weather

Apply by brush, roller, spray or by dipping tools in the release agent immediately before use. Can be used on dump beds, pavers, rollers, tools, spreader bars, belts and conveyors. SITTM Asphalt Release Agent is safe to use under normal applications. Works with all types of asphalt mixes. Does not dry out once applied.


09-12-2011

SITTM Inc. | Asphalt Release Agent - asphalt release agent warm weather

Can be used on dump beds, pavers, rollers, tools, spreader bars, belts and conveyors. Residual effect allows for lighter repeat applications through the day. SITTM Asphalt Release Agent is safe to use under normal applications. Works with all types of asphalt mixes. Does not dry out once applied.


09-12-2011

SITTM Inc. | Products

SITTM Technologies has used its innovative product design practices to create a gasification unit the will optimize the efficient use of carbonic materials for energy needs. They can be used on a variety of materials providing a clean release preventing buildup, and produce a smooth, high quality, stain-free finish.


09-12-2011

SITTM Inc. | Biodiesel Sales

SITTM Technologies encourages local production of biodiesel and will soon be supplying companies with the fuel to help make Sault Ste. Mare, ON the Alternative Energy Capital of North America. We are working collaboratively with producers, processors and other consumers to produce the fuel and boost the local economy. SITTM Technologies is moving forward with its plan to investigate locally-sourced feedstock to produce biodiesel.