Marine Tank Cleaning
Prime Fuel Polishing & Tank Cleaning Inc.
Marine Services, Tank Cleaning, Fuel Tank Cleaning
Marine fuel tanks are often located in difficult to reach areas so we have designed our marine polishing systems to clean in areas with a minimum of overhead clearance, through tank-top holes larger than 1" and to be able to reach even the areas and compartments behind your tank's baffles.
If you have a dirty fuel or a contaminated tank, our goal is to get you running again without having to remove the tank or dispose of the fuel. If we can't reach every square inch of your tank with our polishing system due to your baffle configuration we can often install a leak proof inspection plate to access the closed off areas of your tank to ensure a complete and thorough clean.
We'll test your fuel for water and clarity (ASTM D-4176), grade it on the ASTM D-1500 Color Scale and take before and after photos of your fuel and tank to show you the progress.
Our three step process ensures the next time you fill your tank, bottom resting debris and baffle hidden microbial growth (and asphaltine sludge) will not be stirred into your fuel during your fill up -- because it'll all be gone. High volume fuel fills into dirty tanks can suspend emulsified water, bacteria and microbial growth in your tank for days and until it settles out it leaves your machines or generators at risk of filter clogging and shutdown.
Our tank cleaning process ensures your machines will be ready to run at full capacity at a moments notice without the fear of plugged filters or the possibility of a fuel starved and overheated injector system that may necessitate costly repairs and unnecessary downtime.
Whether your tanks are above or below ground (AST's or UST's), primary or secondary day tanks, are situated in large scale fuel farms, back-up generator belly tanks or diesel powered marine vessels our specialty is providing a completely "drip free" and clean site solution while we polish your fuel. Our tank cleaning system is minimally invasive, causes zero mess and keeps the fuel in the tank where it belongs.
Prime Fuel employs a number of "closed loop filtration systems" that remove bacteria, asphaltine, fungi, microbial growth (both at the fuel/air and fuel/water interfaces) as well as free and suspended emulsified water with a high degree of efficiency. Our eye toward safety, firmly established redundant cleaning and operational protocols and innovative polishing techniques ensure the job is done right every time. Our track record of customer satisfaction and ability to keep your machine in a state of readiness even while work is being performed is what keeps "Prime Fuel" a leader in the field.
It is estimated that 90% of diesel engine and injector wear (and subsequent breakdown) is a result of dirty or moisture contaminated fuel. It is Prime Fuel's primary mandate to not only save our customers costly and unnecessary repairs but to do so at a fraction of the cost of disposal of "unusable" fuel. We realize the gravity of an emergency power generator failure (and rough weather boating breakdown) and will not leave a job until it is completed to our exacting standards. Our job is to provide not only a clean burning (and lower emission) fuel but also to provide the peace of mind that comes from knowing your equipment, boat, generator or emergency power provider will start on time, every time, no matter what the circumstances.
With backgrounds as Heavy Duty Mechanics and thousands of hours of experience designing and running fuel polishing machines and cleaning tanks our team is equipped to handle any tank regardless of its state or size.
"Prime Fuel" provides prompt, professional and integrity driven service with a degree of cleanliness that surprises nearly all of our clients. We not only leave your tanks and equipment cleaner than they were before we arrived but more importantly, we leave them running better -- and at a higher degree of efficiency and performance via more H.P. or KwH -- which, together, translates to increased fuel savings and lower yearly maintenance costs for you, the customer.
Prime fuel is widely trusted in the industry to ensure machine readiness. Our clients range from single day boaters to fuel barges to heli-logging companies to hospitals, jails and correctional facilities, tugboats, radio and television stations, telecommunications companies, banks, recreation facilities, municipal works, computer data storage facilities and every other type of back up generator and fuel storage situation imaginable. There is not a diesel related problem that we haven't encountered -- and fixed.
We won't leave a job until you, the customer, are completely satisfied, well informed about your fuel system and fuel storage situation, and we can assure you that the next time your piece of equipment needs to start, dirty or contaminated fuel (or a filthy tank) will not impede you machine's ability to do it's job.
Our service area includes Toronto, Mississauga, Barrie, Kitchener, Hamilton, Burlington, London, Windsor, Sarnia and most of the rest of Southern Ontario.
, fuel system maintenance
, Fuel Tank Cleaning
, Fuel Tank Cleaning Hamilton
, marine fuel tank cleaning
, Marine Services
, Ontario fuel polishing
, Ontario tank cleaning
, Tank Cleaning