Outdoor Emergency Safety Showers

By: Hughes North America  09-12-2011
Keywords: Warm Water, Spray Nozzles, Prevent Freezing

Technically advanced, heavy duty heated and insulated outdoor emergency safety showers, eyebaths and eye/face wash fountains. Modular design ensures easy servicing. Internal tubular can be stainless steel or galvanized mild steel and the outer casing is made from unbreakable medium density polyethylene. Standard color is white with green but other options are available upon request.

Immersion or trace heating is available. When an immersion heater is fitted, the 100 watt element is easily removed for servicing or replacement. All heated models are fitted with failsafe dual thermostats.

Note: units are not designed to deliver warm water at a constant temperature; cool water is preferable as it soothes the affected area and reduces absorption of chemicals through the skin. Water in the standpipe is heated to 20°C to prevent freezing and avoid shocking the victim with the initial deluge.

Spray nozzles are self draining to eliminate the build-up of bacteria and are easily removed for cleaning.

Keywords: Galvanized Mild Steel, Prevent Freezing, Spray Nozzles, Warm Water,

Contact Hughes North America

Email - none provided

Print this page

Other products and services from Hughes North America

09-12-2011

Decontamination Equipment | Decontamination Showers

In cases where personal protective equipment is worn it is imperative that any contaminant or other unpleasant substance is thoroughly washed off prior to removal. The second stage, the water drench, is delivered from eight high velocity spray nozzles from the sides and two high velocity, high flow rate nozzles from above.


09-12-2011

Indoor Unheated Emergency Safety Showers

To allow these products to be easily exported all units are made up of separate modules to facilitate economic packaging in relatively small boxes, thus greatly reducing packaging and shipping costs. Those models fitted with eyewash/facewash fountains normally have a low level water inlet but are also available with high level water inlet and eyewash/facewash drain piped to floor level.


09-12-2011

Emergency Eye Wash | Facewash Equipment

In an endeavor to keep abreast of the ever increasing legislation concerning the provision of adequate first-aid equipment and facilities, we have expanded and improved our already comprehensive range of emergency eyewash and face wash modes. Eyewash bottles containing a saline solution alone do not meet the criteria; such bottles should only be used after a 10-15 minute wash using a plumbed-in-eyewash or face wash unit.


09-12-2011

General Use Emergency Tank Showers

The outdoor types are heated and pre-insulated to prevent freezing during conditions of frost, whereas the indoor or outdoor versions are insulated but without heating, to ensure a steady temperature is maintained. With the mains supply permanently connected, the 750 litre model will deliver warm water for 15 minutes, recommended by the ANSI standard.


09-12-2011

Products

When choosing this type of emergency equipment, not only is it very important that it has been designed and tested in line with the relevant standard, it is equally important that the correct model is chosen to suit the specific application and location. Throughout industry, and other areas where dangerous chemicals or corrosive substances are used, there are many different conditions that determine the type of safety unit to be installed.