Home of the Phat Moose - cranks

By: Phat Moose Cycles  09-12-2011

BMX cranks?..nope.

Just because the Vendetta are 3 pieces cranks does not automatically make them BMX only. These have been designed for mtb use - downhill, freeride, hard urban..you name it these will do the trick for you.

Sprockets designed for different chainguides, self extracting bolts, bearing spacers to reduce bearing blowouts, 83mm BB widths, designed with weight in mind.

Are you a weight weenie? Try this. Weigh your DH cranks with BB. Aluminum generally has to be much thicker than steel. You'll probably be pleasantly suprised that a 3 piece crank made of steel (better fatigue life) are about the same as your aluminum DH cranks.


Contact Phat Moose Cycles

Email - none provided

Print this page

Other products and services from Phat Moose Cycles

09-12-2011

Home of the Phat Moose - brakeParts

Re-usable fittings, reduce brake line expansion, reduce fluid seepage, in a nicely flexible, coating stainless steel brake line. Goodridge brake lines have been the leading technology in F1 racing, rally racing, motocross, and superbike racing for years. Now they are finally making brake lines for mountain bikes.


09-12-2011

Home of the Phat Moose - chainguides

Engineered to work seamlessly on all Transition Bikes' models with ISCG mounts. Nylock nuts used throughout so the hardware doesn't bounce loose. Easily serviceable with 2 fully sealed bearings. Fits 32-36 tooth chainring setups.


09-12-2011

Home of the Phat Moose - foxForx

Maybe it is time you set that 7 pound single crown you have been riding out at the curb with the rest of the trash. You can set this fork up for street, dirt jumping, cross country, all mountain, freeride, downhill. We feel that the 140R is one of the best all round forks made. It has super plush travel and weighs in at 3.95 pounds. Perhaps the most under-rated fork available.