Health & Safety WHMIS Fall Arrest CPR Forklift TDG Training Blog MTS Worksafe

By: Mts Worksafe  09-12-2011

What are WHMIS classes or classifications?

WHMIS (Workplace Hazardous Materials Information System) uses classifications to group chemicals with similar properties or hazards. The Controlled Products Regulations specifies the criteria used to place materials within each classification. There are six (6) classes although several classes have divisions or subdivisions. Each class has a specific symbol to help people identify the hazard quickly. The classes are:

Class A – Compressed GasClass B – Flammable and Combustible Material

Division 1: Flammable Gas
Division 2: Flammable Liquid
Division 3: Combustible Liquid
Division 4: Flammable Solid
Division 5: Flammable Aerosol
Division 6: Reactive Flammable Material

Class C – Oxidizing MaterialClass D – Poisonous and Infectious Material

Division 1: Materials causing immediate and serious toxic effects
Subdivision A: Very toxic material
Subdivision B: Toxic materialDivision 2: Materials causing other toxic effects
Subdivision A: Very toxic material
Subdivision B: Toxic materialDivision 3: Biohazardous Infection Material

Class E – Corrosive materialClass F – Dangerously reactive material

What is a Class A – Compressed Gas?

Flammable means that the material will burn or catch on fire easily at normal temperatures (below 37.8 degrees C or 100 deg F). Combustible materials must usually be heated before they will catch on fire at temperatures above normal (between 37.8 and 93.3 deg C or 100 and 200 deg F). Reactive flammable materials are those which may suddenly start burning when it touches air or water, or may react with air or water to make a flammable gas. The material may be a solid, liquid or gas which makes up the different divisions that fall under this class. Common examples include: , butane, acetylene, ethanol, , turpentine, , kerosene, Stoddard solvent, spray paints and varnish. The symbol for this class is a flame with a line under it inside a circle.
What is a Class C – Oxidizing Materials?

Oxygen is necessary for a fire to occur. Some chemicals can cause other materials to burn by supplying oxygen. Oxidizers do not usually burn themselves but they will either help the fire by providing more oxygen or they may cause materials that normally do not burn to suddenly catch on fire (spontaneous combustion). In some cases, a spark or flame (source of ignition) is not necessary for the material to catch on fire but only the presence of an oxidizer. Oxidizers can also be in the form of gases (oxygen, ), liquids (nitric acid, perchloric acid solutions) and solids (potassium permanganate, sodium chlorite). Some oxidizers such as the organic peroxide family are extremely hazardous because they will burn (they are combustible) as well as they have the ability to provide oxygen for the fire. They can have strong reactions which can result in an explosion. The symbol for oxidizing materials is an “o” with flames on top of it inside a circle.
What is a Class D – Poisonous and Infectious materials?

Class D materials are those which can cause harm to your body. They are divided into three major divisions.

Division 1: Materials Causing Immediate and Serious Toxic Effects

Division 2: Materials Causing Other Toxic Effects

These materials are poisonous as well. Their effects are not always quick, or if the effects are immediate but they are only temporary. The materials that do not have immediate effects, however, may still have very serious consequences such as cancer, allergies, reproductive problems or harm to the baby, changes to your genes, or irritation / sensitization which have resulted from small exposures over a long period of time (chronic effects).

Division 2 of Class D has two subclasses called D2A (very toxic) and D2B (toxic). While it is not a legal requirement for the WHMIS sub-classification to be reported on the Material Safety Data Sheet (MSDS) nor is it a requirement for classes D2A or D2B to be distinguished on the label, it is often possible to make this distinction using the health hazard information on the label and/or the MSDS.

Products are typically classified as D2A (very toxic) if the chemical has been shown to be carcinogenic, embryo toxic, teratogenic, mutagenic (to reproductive cells), reproductive toxic, sensitizer (to respiratory tract) or chronic (long-term) toxicity (at low doses). Subdivision D2B (toxic) covers mutagenic (to non-reproductive cells), sensitization of the skin, skin or eye irritation, as well as chronic toxic effects.

Examples include: asbestos fibres, , , , , and cadmium. The symbol for materials causing other toxic effects looks like a “T” with an exclamation point “!” at the bottom inside a circle.

Division 3: Biohazardous Infectious Materials

These materials are organisms or the toxins they produce that can cause diseases in people or animals. Included in this division are bacteria, viruses, fungi and parasites. As these organisms can live in body tissues and fluids, they should be treated as toxic. Urine and feces should be treated as toxic only if they are visibly contaminated with blood. Biohazardous infectious materials are usually found in a hospital, health care facility, laboratories, veterinary practices and research facilities. Workers in these places do not usually know which tissues or fluids contain dangerous organisms. For this reason, the workers assume that every sample is dangerous and proper protection is used all the time. Examples of biohazardous infectious materials include the , and salmonella. The symbol for this division looks like three “c”s joined together with a little circle in the middle all inside a circle.
What is a Class E – Corrosive Material?

Corrosive is the name given to materials that can cause severe burns to skin and other human tissues such as the eye or lung, and can attack clothes and other materials including metal. Corrosives are grouped in this special class because their effects are permanent (irritants whose effects may be similar but temporary are grouped in Class D-2). Common corrosives include acids such as and nitric acids, bases such as ammonium hydroxide and caustic soda and other materials such as , chlorine, and nitrogen dioxide. The symbol for a corrosive is a picture of two test tubes pouring liquid on a bar (piece of metal) and a hand with lines coming off of them inside a circle.
What is a Class F – Dangerously Reactive Materials?

A material is considered to be dangerously reactive if it shows three different properties or abilities: first, if it can react very strongly and quickly (called “vigorously”) with water to make a toxic gas; second, if it will react with itself when it gets shocked (bumped or dropped) or if the temperature or pressure increases; and thirdly, if it can vigorously join to itself (polymerization), break down (decomposition) or lose extra water such that it is a more dense material (condensation). If a material is dangerously reactive, it will most likely be described as “unstable”. Most of these materials can be extremely hazardous if they are not handled properly because they can react in such a quick manner very easily. Examples of these products are ethyl acrylate, vinyl chloride, , picric acid and anhydrous aluminum chloride. The symbol for dangerously reactive materials is a picture of a test tube with sparks or lines coming out of the tube surrounded by a letter “R” inside a circle.
Are there any hazardous materials not included in WHMIS?

Yes. There are nine basic categories of materials that are not covered by WHMIS. When WHMIS was created it was recognized that a lot of safety information was already being transmitted to workers for many of these products under other laws. To prevent delay in starting WHMIS, exclusions were made.

They are:

  • consumer restricted products (those products sold to people in regular stores that are already labelled following the rules of the Hazardous Products Act)
  • explosives (as defined by the Explosives Act)
  • cosmetics, drugs, food or devices (as defined by the Food and Drug Act)
  • pest control products (pesticides, herbicides, insecticides, etc) (as defined by the Pest Control Products Act)
  • radioactive materials (as defined by the Nuclear Safety and Control Act)
  • wood and products made of wood
  • a manufactured article
  • tobacco or products made of tobacco
  • hazardous wastes

Materials which fall under WHMIS follow the Transportation of Dangerous Goods Act and Regulations while they are in transport (shipment).

For several years, there have been proposals to make some of the above products follow the WHMIS laws. Most of the products that may be affected are the ones in categories 1, 2, 3, 4, and 5. However, there have been no changes to the WHMIS regulations yet.

Other products and services from Mts Worksafe


Health & Safety WHMIS Fall Arrest CPR Forklift TDG Training Blog MTS Worksafe - blogs

In addition to the fines, the court imposed a 25-per-cent victim fine surcharge, as required by the Provincial Offences Act. In addition to the fine, the court imposed a 25-per-cent victim fine surcharge, as required by the Provincial Offences Act. Failing to take the reasonable precaution of securing or blocking the motion of the coils while a worker was underneath.