1) BFX 76mm LPBT E (Large Pipe Bomb Trainer, Electric)
The BFX 76mm LPBT E
is designed to give a true to life look and feel of a large pipe bomb or IED. The basic unit consists of a 76mm pipe assembly, internal firing mechanism and burst cup holder to provide a loud report (120 db plus) when detonated. It is specifically designed to be detonatedby any configuration of low current (<50ma) IED initiator using a 9V battery orsmall battery pack making the possibilities unlimited in the types of initiators that can be used (motion, timed, pressure etc). This trainer is especially effective as a concealed threat (container, buried etc.) and will effectively teach the trainee to employ effective situational awareness techniques to prevent injury to himself and his team when being confronted with an environment where a potential threat can occur.
Dimensions: 16.5" x 4"
Weight: 12 lbs
Price: Please contact Battlefield FX for current pricing and payment terms.2) BFX 76mm LPBT E
with BFX RF DET
(Radio Frequency Initiator)
The BFX RF DET
is a 2-channel radio frequency remote initiator built for use exclusively with the BFX LPBT E
. The receiver is mounted in a sturdy Pelican case with battery pack and is activated via supplied key fob. LOS transmission range is 100m. To use the trainer activates channel 1 on the key fob. Channel 2 can be used to trigger another remote receiver powering another trainer or some other device (another RF DET will be required). The RF DET is supplied with a set of connecting leads and can be ordered with a magnet so it can be attached to the LPBT or other magnetic surface if desired.Dimensions: 6" x 4" x 2.5"
Weight: 1.25 lbs
Price: Please contact Battlefield FX for current pricing and payment terms.
3) BFX 60mm SPBT TW (Small Pipe Bomb Trainer, Trip Wire)
The BFX 60mm SPBT TW
is a trip wire type PVC pipe bomb trainer suitable for deployment as an effective booby trap. Ituses a mechanical (spring) detonator released by a trip wire and was designed to require an ultra-low trip wire pull force of only 1 lb. Detonation is instantaneous and typical sound output is 112 db plus. The burst cup can be filled with corn starchtype baby powder for additional visual effect. The TW is especially effective in teaching area scanning techniques to allow the trainee to develop skills to prevent injury to himself and his team when entering a room or other confined entry area.Dimensions: 9" x 3"
Weight: 2 lbs
Price: Please contact Battlefield FX for current pricing and payment terms.4) BFX 60mm SPBT NE (Small Pipe Bomb Trainer, Non Electric)
The BFX 60mm SPBT NE
is similar in form and function to the TW version but instead of being fired with a mechanical initiator uses a hand held CO2 dispenser. The CO2 dispenser is remotely connected to the PBT NE via 25' of 1/8" air line. Typical sound output is 112 db plus and the burst cup can be filled with corn starch type baby powder for additional visualeffect. Due to it's small size and light weight, the NE can be deployed as a PBIED (Personal Borne IED) in a vest, backpack or package and detonated by the carrier. It is also effective as a VBIED (Vehicle Borne IED) and can be mounted on a vehicle in any number of places due to its small size. Dimensions: 6" x 3"
Weight: 1.65 lbs
Price: Please contact Battlefield FX for current pricing and payment terms.5) BFX FBT LE PRO (Flash Bang Trainer, Law Enforcement Professional)
The BFX FBT LE PRO resembles an actual pyrotechnic flash-bang device is that it uses a pull pin, spoon released hammer and timed detonator. To operate, a 12 gram CO2 cartridge is loaded into the core assembly and is punctured by the spring loaded hammer when the spoon is released. The high density plastic body is actually the bursting shell and creates a very load report when it bursts. The sound output is very high and it is not recommended to use the FBT in a confined area unless hearing and eye protection is worn. The delay time is typically 2-3 secs and is very effective in simulating room entry where a distraction device would be deployed. Dimensions: 6" x 2.25"
Weight: 7.4 oz
Price: Please contact Battlefield FX for current pricing and payment terms6) BFX QDP (Quick Draw Pouch)
The BFX QDP was custom made for the BFX FBT LE PRO. It's rugged cargo strap construction uses a unique lift system where the FBT can be partially drawn out of the pouch when needed and be grasped in the center of the body in one motion instead of having to be repositioned in the hand as with other pouches. It also has a spoon pocket to prevent snagging and can be used for right or left hand draw.
7) BFX 50mm SEK (Sound Effex Kit)
The BFX 50mm SEK
is a non-pyrotechnic kit enabling trainers to simulate an explosive threat in situational awareness exercises. The body of the device can be used in whole or in part depending on how the device is to be concealed. A 225 ml HDPE bottle is pressurized and burst by high pressure CO2 creating a very loud report simulating a small pyrotechnic device. The sound output is very high and it is not recommended to use the SEK in a confined area unless hearing and eye protection is worn. Dimensions: 16" x 2.00"
Weight: 1.8 lbs
Price: Please contact Battlefield FX for current pricing and payment terms
All BFX products will be supplied with operating instructions and a number of consumables. CO2 cartridges and burst cups/shells can be purchased through SETCAN or BFX.Note: BFX recommends LISS brand 12g CO2 cartridges as they provide the most consistent results. BFX 76mm LPBT E
shown in tool case with burst cups, low pressure air pump and instructions.