HF RFID

By: Ic Magic  09-12-2011
Keywords: Iso, Voltage Regulator, Voltage Range

Multi-Protocol Including ISO 14443, ISO 15693, and EPC

Description:

The IDS-R13MP is an integrated analogue front end and data framing system for 13.56MHz RFID reader systems. The built-in programming options make it suitable for a wide range of applications both in proximity and vicinity RFID systems.
The reader configuration is achieved by selecting the desired protocol in the control registers. The direct access to all control registers also allows fine-tuning of different reader parameters if needed.

Key Features:

  • Supply voltage range 2.7 to 5.5V
  • Protocols: ISO/IEC 15693, ISO 14443A/B and HF EPC
  • Antenna driver using OOK or ASK
  • Dual receiver input providing both AM and PM demodulation avoiding communication holes
  • Reception automatic gain control
  • 3.3V voltage regulator providing up to 20 mA for external MCU
  • High output power (100 or 200 mW) from single 5V supply
  • Significant increase of PSRR through on-chip RF output supply regulator
  • Reader to reader anti-collision
  • Power-down, standby and active mode
  • Temperature range: -40°C to 110°C

Applications:

  • Proximity systems
  • Vicinity systems
  • HF EPC systems
  • High bit rate proximity systems

Package:

32-pin QFN (5 x 5mm)

Keywords: Automatic Gain Control, Framing System, Iso, Programming Options, Voltage Range, Voltage Regulator,

Other products and services from Ic Magic

09-12-2011

UHF RFID

Built in programming options make it suitable for a wide range of applications in UHF RFID systems, especially portable and embedded systems due to the low power consumption and simple BOM.The reader configuration is achieved by selecting the desired settings in control registers. Direct access to all control registers also allows fine-tuning of different reader parameters if needed.The IDS-R900G complies with EPC Class 1 Generation 2 protocol.


09-12-2011

IC MAGIC Inc - en

Compatible with optical and magnetic transducer systems. Selectable interpolation factor (up to 40 transitions. Suitable for differential and single-ended inputs. Wide temperature range: -40 to +120°C.


09-12-2011

IC MAGIC Inc - saluhf

The IDS-SL900A is an EPCglobal Class 3 tag chip optimized for single-cell, battery-powered smart labels with sensor functionality. The chip is ideal for applications using thin and flexible batteries but can also be powered from the RF field. The chip has a fully integrated temperature sensor with a maximum accuracy of 0.5°C. Monitoring and tracking of temperature-sensitive products.


09-12-2011

Product

The frequencies are between 125 KHz (Low Frequency) and 5,8 GHz , depending on range and speed of the data transfer. RFID - based technology provides the possibility of receiving information from moving objects or persons. Handheld technical equipment and mobile devices depend on batteries or accumulators for their supply. A chip tag consisting of a microchip and an antenna communicates with an interrogator.


09-12-2011

IC MAGIC Inc - salhf

The IDS-SL13A is an active/semi-passive tag chip optimized for single-cell, battery-powered smart labels with sensor functionality. The chip is ideal for applications using thin and flexible batteries but can also be powered from the RF field. The Mixed-Mode Sensor interface allows the connection of an external mixed-mode sensor. The chip has a fully integrated temperature sensor with a maximum accuracy of 0.5°C.