Ultramax Drag Conveyors

By: Mitchell Mill Systems  09-12-2011
Keywords: Stainless Steel, Stainless Steel Fabrication, Belt Drive


Size: 225mm-300mm-350mm-400mm. Capacity: Up to 300M.T.P.H.
Capacities are based on material density of 25# / cu. ft. or 400 kg / m3 and 45# / cu. ft. or 721 kg / m3. 
No carryover of free flowing dry product when used to fill multiple bin systems and when operated in the ultra clean mode.
Superior capactity when used at Maximum fill capability. 
Spring loaded boot section for quick stop in vent of a chain break (Model 2). 
Heavy duty totally enclosed take up units ensure that the chain stays tight. 
Direct coupled gearbox, chain and sprocket, “V" belt drive systems are available. 
Component manufacturing provides for quick assembly and future extensions. 
Round top cover provides excellent weather protection and minimum dust build up. 
Drop gate discharge provides an opening with no paddle carryover bars. 
Adjustable control plate at the inlet provides for Ultra clean operation (below the chain) or Maximum capacity (above the chain).
Heavy duty construction, mild steel, galvanized or stainless steel fabrication.

Warning:

Explosion venting may be required depending on location and / or product being transferred through this equipment.
To operate without proper explosion venting may result in fire or explosion. check local industrial codes and policies.

MODEL

SPEED

CAPACITY / HR.

FPM

M / SEC.

RPM

CU.M.

M.T.P.H.

9"(225)

100

125

150

0.5

0.6

0.8

70

90

110

﹡ BASED ON 25#/ CU.FT. OR 400 KG / M3 @45% LOADING

39

16

49

20

58

23

﹡ BASED ON 45#/ CU.FT. OR 721 KG / M3 @80% LOADING

98

76

123

88

148

106

12"(300)

100

125 

150

0.5

0.6

0.8

56

70

84

﹡ BASED ON 25#/ CU.FT. OR 400 KG / M3 @45% LOADING

68

27

85

34

102

41

﹡ BASED ON 45#/ CU.FT. OR 721 KG / M3 @80% LOADING

169

122

210

151

252

180

14"(350)

100

125

150

0.5

0.6

0.8

56

62

70

﹡ BASED ON 25#/ CU.FT. OR 400 KG / M3 @45% LOADING

91

37

115

46

138

55

﹡ BASED ON 45#/ CU.FT. OR 721 KG / M3 @80% LOADING

224

161

280

202

336

242

16"(400)

100

125

150

0.5

0.6

0.8

36

45

55

﹡ BASED ON 25#/ CU.FT. OR 400 KG / M3 @45% LOADING

117

47

146

58

175

70

﹡ BASED ON 45#/ CU.FT. OR 721 KG / M3 @80% LOADING

289

208

361

260

433

312

Keywords: Belt Drive, Belt Drive Systems, Explosion Venting, Industrial Codes, Material Density, Stainless Steel, Stainless Steel Fabrication,

Other products and services from Mitchell Mill Systems

09-12-2011

Two Deck Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Heavy duty totally enclosed take up units ensure that the chain stays tight.Direct coupled gearbox, chain and sprocket and “V?belt drive systems are available. Optional curved section supplied to transfer product from horizontal to vertical.


09-12-2011

Bucket Elevators

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Heavy duty totally enclosed take up units ensure that belt stays tight and runs straight. Pillow block bearings for head section and flange style bearings for boot sections. Optional self cleaning boot section to ensure no cross contamination.


09-12-2011

Square Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Direct coupled gearbox, chain and sprocket, “V?belt drive systems are available. Heavy duty totally enclosed take up units ensure that the chain stays tight. Mild steel or stainless steel fabrication.


09-12-2011

Round Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Direct coupled gearbox, chain and sprocket, “V?belt drive systems are available. Heavy duty totally enclosed take up units ensure that the chain stays tight. Mild steel or stainless steel fabrication. Sizes: from 225mm to 450mm.


09-12-2011

Screw Feeders

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Screw feeders are installed under bins or under a full head of product surge resulting in 95% loading. The fighting in the inlet of a screw feeder is multiple pitch or tapered flights (customers choice). Capacity: Up to 560 M.T.P.H.at 95% conveyor loading.